-----Original Message-----
From: Joakim Zhang <redacted>
Sent: 2021年3月31日 15:44
To: Jon Hunter <jonathanh@nvidia.com>
Cc: netdev@vger.kernel.org; Linux Kernel Mailing List
[off-list ref]; linux-tegra [off-list ref];
Jakub Kicinski [off-list ref]
Subject: RE: Regression v5.12-rc3: net: stmmac: re-init rx buffers when mac
resume back

quoted

-----Original Message-----
From: Jon Hunter <jonathanh@nvidia.com>
Sent: 2021年3月30日 20:51
To: Joakim Zhang <redacted>
Cc: netdev@vger.kernel.org; Linux Kernel Mailing List
[off-list ref]; linux-tegra
[off-list ref]; Jakub Kicinski [off-list ref]
Subject: Re: Regression v5.12-rc3: net: stmmac: re-init rx buffers
when mac resume back



On 25/03/2021 08:12, Joakim Zhang wrote:

...

quoted

quoted

quoted

quoted

quoted

You mean one of your boards? Does other boards with STMMAC can
work

fine?

We have two devices with the STMMAC and one works OK and the
other

fails.

quoted

quoted

They are different generation of device and so there could be
some architectural differences which is causing this to only be
seen on one

device.

quoted

quoted

quoted

It's really strange, but I also don't know what architectural
differences could

affect this. Sorry.

I realised that for the board which fails after this change is made,
it has the IOMMU enabled. The other board does not at the moment
(although work is in progress to enable). If I add
'iommu.passthrough=1' to cmdline for the failing board, then it works
again. So in my case, the problem is linked to the IOMMU being enabled.

Does you platform enable the IOMMU?

Hi Jon,

There is no IOMMU hardware available on our boards. But why IOMMU would
affect it during suspend/resume, and no problem in normal mode?

One more add, I saw drivers/iommu/tegra-gart.c(not sure if is this) support suspend/resume, is it possible iommu resume back after stmmac?

Best Regards,
Joakim Zhang

Best Regards,
Joakim Zhang

quoted

Thanks
Jon

--
nvpublic