[RESEND PATCH v8 net-next 02/15] dts: marvell: add CM3 SRAM memory to cp11x ethernet device tree
flat view
STALE2087d
SUPERSEDED
From: <hidden>
Date: 2021-02-07 08:22:49
Also in:
linux-arm-kernel, linux-devicetree, lkml
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds
Status: Superseded by v13 (posted 2021-02-11). [go to v13]
Revision v8 (12 revisions archived).
Revisions (12)
- rfc
- v2 [diff against previous]
- v3 [diff against previous]
- v4 [diff against previous]
- v6 [diff against previous]
- v7 [diff against previous]
- v8 current [diff against previous] re-posted current
- v9 [diff against previous]
- v10 [diff against previous]
- v11 [diff against previous]
- v12 [diff against previous]
- v13 [diff against previous]
From: Konstantin Porotchkin <redacted> CM3 SRAM address space would be used for Flow Control configuration. Signed-off-by: Stefan Chulski <redacted> Signed-off-by: Konstantin Porotchkin <redacted> --- arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 9dcf16b..359cf42 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi@@ -69,6 +69,8 @@ status = "disabled"; dma-coherent; + cm3-mem = <&CP11X_LABEL(cm3_sram)>; + CP11X_LABEL(eth0): eth0 { interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, <43 IRQ_TYPE_LEVEL_HIGH>,
@@ -211,6 +213,14 @@ }; }; + CP11X_LABEL(cm3_sram): cm3@220000 { + compatible = "mmio-sram"; + reg = <0x220000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x220000 0x800>; + }; + CP11X_LABEL(rtc): rtc@284000 { compatible = "marvell,armada-8k-rtc"; reg = <0x284000 0x20>, <0x284080 0x24>;
--
1.9.1