[RESEND PATCH v8 net-next 02/15] dts: marvell: add CM3 SRAM memory to cp11x ethernet device tree
From: <hidden>
Date: 2021-02-07 08:22:49
Also in:
linux-devicetree, lkml, netdev
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds
From: Konstantin Porotchkin <redacted> CM3 SRAM address space would be used for Flow Control configuration. Signed-off-by: Stefan Chulski <redacted> Signed-off-by: Konstantin Porotchkin <redacted> --- arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 9dcf16b..359cf42 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi@@ -69,6 +69,8 @@ status = "disabled"; dma-coherent; + cm3-mem = <&CP11X_LABEL(cm3_sram)>; + CP11X_LABEL(eth0): eth0 { interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, <43 IRQ_TYPE_LEVEL_HIGH>,
@@ -211,6 +213,14 @@ }; }; + CP11X_LABEL(cm3_sram): cm3@220000 { + compatible = "mmio-sram"; + reg = <0x220000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x220000 0x800>; + }; + CP11X_LABEL(rtc): rtc@284000 { compatible = "marvell,armada-8k-rtc"; reg = <0x284000 0x20>, <0x284080 0x24>;
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel