Thread (5 messages) read the whole thread 5 messages, 4 authors, 2021-02-23
STALE1987d LANDED

Landed in mainline as 4e9d9d1f4880 on 2021-02-23.

[PATCH v2 net-next] net: phy: icplus: call phy_restore_page() when phy_select_page() fails

From: Dan Carpenter <hidden>
Date: 2021-02-19 10:12:24
Also in: kernel-janitors
Subsystem: ethernet phy library, networking drivers, the rest · Maintainers: Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

The comments to phy_select_page() say that "phy_restore_page() must
always be called after this, irrespective of success or failure of this
call."  If we don't call phy_restore_page() then we are still holding
the phy_lock_mdio_bus() so it eventually leads to a dead lock.

Fixes: 32ab60e53920 ("net: phy: icplus: add MDI/MDIX support for IP101A/G")
Fixes: f9bc51e6cce2 ("net: phy: icplus: fix paged register access")
Signed-off-by: Dan Carpenter <redacted>
---
v2: fix a couple other instances I missed in v1

 drivers/net/phy/icplus.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index 3e431737c1ba..a00a667454a9 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -239,7 +239,7 @@ static int ip101a_g_config_intr_pin(struct phy_device *phydev)
 
 	oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
 	if (oldpage < 0)
-		return oldpage;
+		goto out;
 
 	/* configure the RXER/INTR_32 pin of the 32-pin IP101GR if needed: */
 	switch (priv->sel_intr32) {
@@ -314,7 +314,7 @@ static int ip101a_g_read_status(struct phy_device *phydev)
 
 	oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
 	if (oldpage < 0)
-		return oldpage;
+		goto out;
 
 	ret = __phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
 	if (ret < 0)
@@ -349,7 +349,8 @@ static int ip101a_g_read_status(struct phy_device *phydev)
 static int ip101a_g_config_mdix(struct phy_device *phydev)
 {
 	u16 ctrl = 0, ctrl2 = 0;
-	int oldpage, ret;
+	int oldpage;
+	int ret = 0;
 
 	switch (phydev->mdix_ctrl) {
 	case ETH_TP_MDI:
@@ -367,7 +368,7 @@ static int ip101a_g_config_mdix(struct phy_device *phydev)
 
 	oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
 	if (oldpage < 0)
-		return oldpage;
+		goto out;
 
 	ret = __phy_modify(phydev, IP10XX_SPEC_CTRL_STATUS,
 			   IP101A_G_AUTO_MDIX_DIS, ctrl);
-- 
2.30.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help