Re: [PATCH net-next v2 2/2] net: phy: broadcom: Do not modify LED configuration for SFP module PHYs
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2021-02-13 03:00:09
On 2/12/2021 6:18 PM, Robert Hancock wrote:
bcm54xx_config_init was modifying the PHY LED configuration to enable link and activity indications. However, some SFP modules (such as Bel-Fuse SFP-1GBT-06) have no LEDs but use the LED outputs to control the SFP LOS signal, and modifying the LED settings will cause the LOS output to malfunction. Skip this configuration for PHYs which are bound to an SFP bus. Signed-off-by: Robert Hancock <redacted>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> -- Florian