Re: [PATCH net-next v2 1/2] net: phy: broadcom: Set proper 1000BaseX/SGMII interface mode for BCM54616S
flat view
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2021-02-13 03:00:09
On 2/12/2021 6:18 PM, Robert Hancock wrote:
The default configuration for the BCM54616S PHY may not match the desired mode when using 1000BaseX or SGMII interface modes, such as when it is on an SFP module. Add code to explicitly set the correct mode using programming sequences provided by Bel-Fuse: https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-sfp-1gbt-05-series.pdf https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-sfp-1gbt-06-series.pdf Signed-off-by: Robert Hancock <redacted>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> -- Florian