[PATCH v5 2/6] net: dsa: microchip: ksz8795: move cpu_select_interface to extra function
From: Michael Grzeschik <hidden>
Date: 2020-12-07 12:57:30
Subsystem:
microchip ksz series ethernet switch driver, networking drivers, networking [dsa], the rest · Maintainers:
Woojung Huh, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Linus Torvalds
This patch moves the cpu interface selection code to a individual function specific for ksz8795. It will make it simpler to customize the code path for different switches supported by this driver. Signed-off-by: Michael Grzeschik <redacted> --- v1 -> v5: - extracted this from previous bigger patch --- drivers/net/dsa/microchip/ksz8795.c | 92 ++++++++++++++++------------- 1 file changed, 50 insertions(+), 42 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 1d12597a1c8a4..53cb41087a594 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c@@ -911,10 +911,58 @@ static void ksz8_port_mirror_del(struct dsa_switch *ds, int port, PORT_MIRROR_SNIFFER, false); } +static void ksz8795_cpu_interface_select(struct ksz_device *dev, int port) +{ + struct ksz_port *p = &dev->ports[port]; + u8 data8; + + if (!p->interface && dev->compat_interface) { + dev_warn(dev->dev, + "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. " + "Please update your device tree.\n", + port); + p->interface = dev->compat_interface; + } + + /* Configure MII interface for proper network communication. */ + ksz_read8(dev, REG_PORT_5_CTRL_6, &data8); + data8 &= ~PORT_INTERFACE_TYPE; + data8 &= ~PORT_GMII_1GPS_MODE; + switch (p->interface) { + case PHY_INTERFACE_MODE_MII: + p->phydev.speed = SPEED_100; + break; + case PHY_INTERFACE_MODE_RMII: + data8 |= PORT_INTERFACE_RMII; + p->phydev.speed = SPEED_100; + break; + case PHY_INTERFACE_MODE_GMII: + data8 |= PORT_GMII_1GPS_MODE; + data8 |= PORT_INTERFACE_GMII; + p->phydev.speed = SPEED_1000; + break; + default: + data8 &= ~PORT_RGMII_ID_IN_ENABLE; + data8 &= ~PORT_RGMII_ID_OUT_ENABLE; + if (p->interface == PHY_INTERFACE_MODE_RGMII_ID || + p->interface == PHY_INTERFACE_MODE_RGMII_RXID) + data8 |= PORT_RGMII_ID_IN_ENABLE; + if (p->interface == PHY_INTERFACE_MODE_RGMII_ID || + p->interface == PHY_INTERFACE_MODE_RGMII_TXID) + data8 |= PORT_RGMII_ID_OUT_ENABLE; + data8 |= PORT_GMII_1GPS_MODE; + data8 |= PORT_INTERFACE_RGMII; + p->phydev.speed = SPEED_1000; + break; + } + ksz_write8(dev, REG_PORT_5_CTRL_6, data8); + p->phydev.duplex = 1; +} + static void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port) { struct ksz_port *p = &dev->ports[port]; - u8 data8, member; + u8 member; /* enable broadcast storm limit */ ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
@@ -931,47 +979,7 @@ static void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port) ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true); if (cpu_port) { - if (!p->interface && dev->compat_interface) { - dev_warn(dev->dev, - "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. " - "Please update your device tree.\n", - port); - p->interface = dev->compat_interface; - } - - /* Configure MII interface for proper network communication. */ - ksz_read8(dev, REG_PORT_5_CTRL_6, &data8); - data8 &= ~PORT_INTERFACE_TYPE; - data8 &= ~PORT_GMII_1GPS_MODE; - switch (p->interface) { - case PHY_INTERFACE_MODE_MII: - p->phydev.speed = SPEED_100; - break; - case PHY_INTERFACE_MODE_RMII: - data8 |= PORT_INTERFACE_RMII; - p->phydev.speed = SPEED_100; - break; - case PHY_INTERFACE_MODE_GMII: - data8 |= PORT_GMII_1GPS_MODE; - data8 |= PORT_INTERFACE_GMII; - p->phydev.speed = SPEED_1000; - break; - default: - data8 &= ~PORT_RGMII_ID_IN_ENABLE; - data8 &= ~PORT_RGMII_ID_OUT_ENABLE; - if (p->interface == PHY_INTERFACE_MODE_RGMII_ID || - p->interface == PHY_INTERFACE_MODE_RGMII_RXID) - data8 |= PORT_RGMII_ID_IN_ENABLE; - if (p->interface == PHY_INTERFACE_MODE_RGMII_ID || - p->interface == PHY_INTERFACE_MODE_RGMII_TXID) - data8 |= PORT_RGMII_ID_OUT_ENABLE; - data8 |= PORT_GMII_1GPS_MODE; - data8 |= PORT_INTERFACE_RGMII; - p->phydev.speed = SPEED_1000; - break; - } - ksz_write8(dev, REG_PORT_5_CTRL_6, data8); - p->phydev.duplex = 1; + ksz8795_cpu_interface_select(dev, port); member = dev->port_mask; } else {
--
2.29.2