Re: [PATCH net-next + leds v2 6/7] net: phy: marvell: add support for LEDs controlled by Marvell PHYs
From: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Date: 2020-09-10 18:37:58
Also in:
linux-leds, lkml
On Thu, Sep 10, 2020 at 08:31:54PM +0200, Andrew Lunn wrote:
Generally the driver will default to the hardware reset blink pattern. There are a few PHY drivers which change this at probe, but not many. The silicon defaults are pretty good.
The "right" blink pattern can be a matter of how the hardware is wired. For example, if you have bi-colour LEDs and the PHY supports special bi-colour mixing modes. -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!