Thread (11 messages) 11 messages, 3 authors, 2020-09-10
STALE2211d LANDED

Landed in mainline as cc293f5420e5 on 2020-09-11.

[PATCH rdma-next 6/8] RDMA/qedr: Fix iWARP active mtu display

From: Michal Kalderon <hidden>
Date: 2020-09-02 16:58:40
Also in: linux-rdma
Subsystem: infiniband subsystem, qlogic ql4xxx rdma driver, the rest · Maintainers: Jason Gunthorpe, Leon Romanovsky, Michal Kalderon, Linus Torvalds

Currently iWARP does not support mtu-change. Notify user when
MTU changes that reload of qedr is required for mtu to change.
Display the correct active mtu.

Fixes: f5b1b1775be6 ("RDMA/qedr: Add iWARP support in existing verbs")
Signed-off-by: Michal Kalderon <redacted>
---
 drivers/infiniband/hw/qedr/main.c  | 7 +++++++
 drivers/infiniband/hw/qedr/verbs.c | 3 ++-
 2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/qedr/main.c b/drivers/infiniband/hw/qedr/main.c
index 8e1365951fb6..1f32e8b8cc11 100644
--- a/drivers/infiniband/hw/qedr/main.c
+++ b/drivers/infiniband/hw/qedr/main.c
@@ -1026,6 +1026,13 @@ static void qedr_notify(struct qedr_dev *dev, enum qede_rdma_event event)
 	case QEDE_CHANGE_ADDR:
 		qedr_mac_address_change(dev);
 		break;
+	case QEDE_CHANGE_MTU:
+		if (rdma_protocol_iwarp(&dev->ibdev, 1))
+			if (dev->ndev->mtu != dev->iwarp_max_mtu)
+				DP_NOTICE(dev,
+					  "Mtu was changed from %d to %d. This will not take affect for iWARP until qedr is reloaded\n",
+					  dev->iwarp_max_mtu, dev->ndev->mtu);
+		break;
 	default:
 		pr_err("Event not supported\n");
 	}
diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c
index 62fe9fc40f42..4ec2d05f63d1 100644
--- a/drivers/infiniband/hw/qedr/verbs.c
+++ b/drivers/infiniband/hw/qedr/verbs.c
@@ -231,15 +231,16 @@ int qedr_query_port(struct ib_device *ibdev, u8 port, struct ib_port_attr *attr)
 		attr->phys_state = IB_PORT_PHYS_STATE_DISABLED;
 	}
 	attr->max_mtu = IB_MTU_4096;
-	attr->active_mtu = iboe_get_mtu(dev->ndev->mtu);
 	attr->lid = 0;
 	attr->lmc = 0;
 	attr->sm_lid = 0;
 	attr->sm_sl = 0;
 	attr->ip_gids = true;
 	if (rdma_protocol_iwarp(&dev->ibdev, 1)) {
+		attr->active_mtu = iboe_get_mtu(dev->iwarp_max_mtu);
 		attr->gid_tbl_len = 1;
 	} else {
+		attr->active_mtu = iboe_get_mtu(dev->ndev->mtu);
 		attr->gid_tbl_len = QEDR_MAX_SGID;
 		attr->pkey_tbl_len = QEDR_ROCE_PKEY_TABLE_LEN;
 	}
-- 
2.14.5
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help