Thread (17 messages) 17 messages, 3 authors, 2020-08-07

Re: [PATCH RFC leds + net-next v3 2/2] net: phy: marvell: add support for PHY LEDs via LED class

From: Pavel Machek <hidden>
Date: 2020-07-25 09:23:45
Also in: linux-leds, lkml

Hi!
+static const struct marvell_led_mode_info marvell_led_mode_info[] = {
+	{ "link",			{ 0x0,  -1, 0x0,  -1,  -1,  -1, }, 0 },
+	{ "link/act",			{ 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, }, 0 },
+	{ "1Gbps/100Mbps/10Mbps",	{ 0x2,  -1,  -1,  -1,  -1,  -1, }, 0 },
is this "1Gbps-10Mbps"?
+	{ "act",			{ 0x3, 0x3, 0x3, 0x3, 0x3, 0x3, }, 0 },
+	{ "blink-act",			{ 0x4, 0x4, 0x4, 0x4, 0x4, 0x4, }, 0 },
+	{ "tx",				{ 0x5,  -1, 0x5,  -1, 0x5, 0x5, }, 0 },
+	{ "tx",				{  -1,  -1,  -1, 0x5,  -1,  -1, }, L3V5_TRANS },
+	{ "rx",				{  -1,  -1,  -1,  -1, 0x0, 0x0, }, 0 },
+	{ "rx",				{  -1, 0x0,  -1,  -1,  -1,  -1, }, L1V0_RECV },
+	{ "copper",			{ 0x6,  -1,  -1,  -1,  -1,  -1, }, 0 },
+	{ "copper",			{  -1, 0x0,  -1,  -1,  -1,  -1, }, L1V0_COPPER },
+	{ "1Gbps",			{ 0x7,  -1,  -1,  -1,  -1,  -1, }, 0 },
+	{ "link/rx",			{  -1, 0x2,  -1, 0x2, 0x2, 0x2, }, 0 },
+	{ "100Mbps-fiber",		{  -1, 0x5,  -1,  -1,  -1,  -1, }, L1V5_100_FIBER },
+	{ "100Mbps-10Mbps",		{  -1, 0x5,  -1,  -1,  -1,  -1, }, L1V5_100_10 },
+	{ "1Gbps-100Mbps",		{  -1, 0x6,  -1,  -1,  -1,  -1, }, 0 },
+	{ "1Gbps-10Mbps",		{  -1,  -1, 0x6, 0x6,  -1,  -1, }, 0 },
+	{ "100Mbps",			{  -1, 0x7,  -1,  -1,  -1,  -1, }, 0 },
+	{ "10Mbps",			{  -1,  -1, 0x7,  -1,  -1,  -1, }, 0 },
+	{ "fiber",			{  -1,  -1,  -1, 0x0,  -1,  -1, }, L3V0_FIBER },
+	{ "fiber",			{  -1,  -1,  -1, 0x7,  -1,  -1, }, L3V7_FIBER },
+	{ "FullDuplex",			{  -1,  -1,  -1, 0x7,  -1,  -1, }, L3V7_DUPLEX },
+	{ "FullDuplex",			{  -1,  -1,  -1,  -1, 0x6, 0x6, }, 0 },
+	{ "FullDuplex/collision",	{  -1,  -1,  -1,  -1, 0x7, 0x7, }, 0 },
+	{ "FullDuplex/collision",	{  -1,  -1, 0x2,  -1,  -1,  -1, }, L2V2_DUPLEX },
+	{ "ptp",			{  -1,  -1, 0x2,  -1,  -1,  -1, }, L2V2_PTP },
+	{ "init",			{  -1,  -1, 0x2,  -1,  -1,  -1, }, L2V2_INIT },
+	{ "los",			{  -1,  -1,  -1, 0x0,  -1,  -1, }, L3V0_LOS },
+	{ "hi-z",			{ 0xa, 0xa, 0xa, 0xa, 0xa, 0xa, }, 0 },
+	{ "blink",			{ 0xb, 0xb, 0xb, 0xb, 0xb, 0xb, }, 0 },
+};
Certainly more documentation will be required here, what "ptp" setting
does, for example, is not very obvious to me.

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Attachments

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help