Re: [RFC PATCH 9/9] dt-bindings: net: dsa: Add documentation for Hellcreek switches

On 6/22/20 5:05 AM, Kurt Kanzenbach wrote:

On Fri Jun 19 2020, Kurt Kanzenbach wrote:

quoted

On Thu Jun 18 2020, Florian Fainelli wrote:

quoted

On 6/17/2020 11:40 PM, Kurt Kanzenbach wrote:

quoted

Add basic documentation and example.

Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
---
 .../devicetree/bindings/net/dsa/hellcreek.txt | 72 +++++++++++++++++++
 1 file changed, 72 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/dsa/hellcreek.txt

diff --git a/Documentation/devicetree/bindings/net/dsa/hellcreek.txt b/Documentation/devicetree/bindings/net/dsa/hellcreek.txt
new file mode 100644
index 000000000000..9ea6494dc554
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/hellcreek.txt

This should be a YAML binding and we should also convert the DSA binding
to YAML one day.

OK.

I converted it into a YAML binding. Should I provide the dsa.yaml as
well? Otherwise I have to define the DSA properties such as dsa,member
in the hellcreek.yaml file.

If you have the generic DSA binding converted as YAML that would be
highly welcome you can submit that separately from your patch series.

There are quite a few Device Tree sources in tree that can be used as a
validation vector for dsa.yaml.
-- 
Florian