[for-next PATCH v2 5/5] arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes
From: Grygorii Strashko <grygorii.strashko@ti.com>
Date: 2020-03-03 16:01:11
Also in:
linux-devicetree, lkml
Subsystem:
arm/texas instruments k3 architecture, the rest · Maintainers:
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Linus Torvalds
Add DT node for MCU System Control module DT node and DT node for the TI J721E SoC phy-gmii-sel PHY required for Ethernet ports mode selection. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 16c874bfd49a..6f961d5f077a 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi@@ -34,6 +34,20 @@ }; }; + mcu_conf: syscon@40f00000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x40f00000 0x0 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x40f00000 0x20000>; + + phy_gmii_sel: phy@4040 { + compatible = "ti,am654-phy-gmii-sel"; + reg = <0x4040 0x4>; + #phy-cells = <1>; + }; + }; + wkup_pmx0: pinmux@4301c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */
--
2.17.1