[for-next PATCH v2 4/5] arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node
From: Grygorii Strashko <grygorii.strashko@ti.com>
Date: 2020-03-03 16:01:00
Also in:
linux-devicetree, lkml
Subsystem:
arm/texas instruments k3 architecture, the rest · Maintainers:
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Linus Torvalds
Add DT node for the TI AM65x SoC phy-gmii-sel PHY required for Ethernet ports mode selection. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 92629cbdc184..ad89f93f30e5 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi@@ -12,6 +12,12 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x40f00000 0x20000>; + + phy_gmii_sel: phy@4040 { + compatible = "ti,am654-phy-gmii-sel"; + reg = <0x4040 0x4>; + #phy-cells = <1>; + }; }; mcu_uart0: serial@40a00000 {
--
2.17.1