Re: [CFT 4/8] net: axienet: use resolved link config in mac_link_up()
From: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Date: 2020-02-24 13:01:45
Also in:
linux-arm-kernel
On Mon, Feb 24, 2020 at 12:24:21PM +0000, Andre Przywara wrote:
On Mon, 17 Feb 2020 17:24:09 +0000 Russell King [off-list ref] wrote: Hi Russell,quoted
Convert the Xilinx AXI ethernet driver to use the finalised link parameters in mac_link_up() rather than the parameters in mac_config().Many thanks for this series, a quite neat solution for the problems I saw! I picked 1/8 and 4/8 on top of net-next/master as of today: c3e042f54107376 ("igmp: remove unused macro IGMP_Vx_UNSOLICITED_REPORT_INTERVAL") and it worked great on my FPGA board using SGMII (but no in-band negotiation over that link). I had the 64-bit DMA patches on top, but that doesn't affect this series. Tested-by: Andre Przywara <andre.przywara@arm.com>
Great, thanks for testing!
Is this heading for 5.7?
Yes, that is my hope. -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up According to speedtest.net: 11.9Mbps down 500kbps up