[PATCH 01/16] dt-bindings: at_xdmac: add entry for microchip compatibles
From: Claudiu Beznea <hidden>
Date: 2020-01-08 12:56:26
Also in:
dmaengine, linux-arm-kernel, linux-can, linux-devicetree, linux-iio, linux-media, linux-rtc, linux-spi, lkml
Subsystem:
dma generic offload engine subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Vinod Koul, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add entry for microchip compatibles. This is for "microchip,sam9x60-dma" DT binding. Signed-off-by: Claudiu Beznea <redacted> --- Documentation/devicetree/bindings/dma/atmel-xdma.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/dma/atmel-xdma.txt b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
index 0eb2b3207e08..081a76c3db2f 100644
--- a/Documentation/devicetree/bindings/dma/atmel-xdma.txt
+++ b/Documentation/devicetree/bindings/dma/atmel-xdma.txt@@ -2,9 +2,10 @@ * XDMA Controller Required properties: -- compatible: Should be "atmel,<chip>-dma". +- compatible: Should be "atmel,<chip>-dma" or "microchip,<chip>-dma". <chip> compatible description: - sama5d4: first SoC adding the XDMAC + - sam9x60: Microchip SoC - reg: Should contain DMA registers location and length. - interrupts: Should contain DMA interrupt. - #dma-cells: Must be <1>, used to represent the number of integer cells in
--
2.7.4