[PATCH v3 03/12] ARM: dts: pandora-common: define wl1251 as child node of mmc3
From: H. Nikolaus Schaller <hidden>
Date: 2019-11-07 10:31:28
Also in:
linux-arm-kernel, linux-devicetree, linux-mmc, linux-omap, linux-wireless, lkml, stable
Subsystem:
the rest · Maintainer:
Linus Torvalds
Since v4.7 the dma initialization requires that there is a
device tree property for "rx" and "tx" channels which is
not provided by the pdata-quirks initialization.
By conversion of the mmc3 setup to device tree this will
finally allows to remove the OpenPandora wlan specific omap3
data-quirks.
Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")
Signed-off-by: H. Nikolaus Schaller <redacted>
Cc: <redacted> # 4.7.0
---
arch/arm/boot/dts/omap3-pandora-common.dtsi | 36 +++++++++++++++++++--
1 file changed, 34 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index ec5891718ae6..150d5be42d27 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi@@ -226,6 +226,17 @@ gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */ }; + /* wl1251 wifi+bt module */ + wlan_en: fixed-regulator-wg7210_en { + compatible = "regulator-fixed"; + regulator-name = "vwlan"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <50000>; + enable-active-high; + gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + /* wg7210 (wifi+bt module) 32k clock buffer */ wg7210_32k: fixed-regulator-wg7210_32k { compatible = "regulator-fixed";
@@ -522,9 +533,30 @@ /*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/ /* GPIO_127 */ }; -/* mmc3 is probed using pdata-quirks to pass wl1251 card data */ &mmc3 { - status = "disabled"; + vmmc-supply = <&wlan_en>; + + bus-width = <4>; + non-removable; + ti,non-removable; + cap-power-off-card; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + wlan: wifi@1 { + compatible = "ti,wl1251"; + + reg = <1>; + + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_21 */ + + ti,wl1251-has-eeprom; + }; }; /* bluetooth*/
--
2.23.0