[net-next v2 09/12] i40e: Check if the BAR size is large enough before writing to registers
From: Jeff Kirsher <hidden>
Date: 2019-06-14 20:16:13
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Adam Ludkiewicz <redacted> This patch fixes the problem with a kernel panic occurring when trying to bind the i40e driver to a non-i40e port. The problem is fixed by checking if the BAR size in the device is large enough by reading the highest register. Signed-off-by: Adam Ludkiewicz <redacted> Tested-by: Andrew Bowers <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/ethernet/intel/i40e/i40e_main.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 12ae4d99109b..1d78db15c65a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c@@ -14205,7 +14205,17 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pf->ioremap_len = min_t(int, pci_resource_len(pdev, 0), I40E_MAX_CSR_SPACE); - + /* We believe that the highest register to read is + * I40E_GLGEN_STAT_CLEAR, so we check if the BAR size + * is not less than that before mapping to prevent a + * kernel panic. + */ + if (pf->ioremap_len < I40E_GLGEN_STAT_CLEAR) { + dev_err(&pdev->dev, "Cannot map registers, bar size 0x%X too small, aborting\n", + pf->ioremap_len); + err = -ENOMEM; + goto err_ioremap; + } hw->hw_addr = ioremap(pci_resource_start(pdev, 0), pf->ioremap_len); if (!hw->hw_addr) { err = -EIO;
--
2.21.0