[PATCH v2 16/17] arm64: dts: sdm845: add IPA information
From: Alex Elder <hidden>
Date: 2019-05-31 03:54:21
Also in:
linux-arm-kernel, linux-arm-msm, linux-devicetree, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Add IPA-related nodes and definitions to "sdm845.dtsi". Signed-off-by: Alex Elder <redacted> --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 51 ++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index fcb93300ca62..985479925af8 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi@@ -20,6 +20,7 @@ #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/clock/qcom,gcc-sdm845.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/interconnect/qcom,sdm845.h> / { interrupt-parent = <&intc>;
@@ -517,6 +518,17 @@ interrupt-controller; #interrupt-cells = <2>; }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; }; smp2p-slpi {
@@ -1268,6 +1280,45 @@ }; }; + ipa@1e40000 { + compatible = "qcom,sdm845-ipa"; + + modem-init; + + reg = <0 0x1e40000 0 0x7000>, + <0 0x1e47000 0 0x2000>, + <0 0x1e04000 0 0x2c000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = + <&intc 0 311 IRQ_TYPE_EDGE_RISING>, + <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = + <&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_EBI1>, + <&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_IMEM>, + <&rsc_hlos MASTER_APPSS_PROC &rsc_hlos SLAVE_IPA_CFG>; + interconnect-names = "memory", + "imem", + "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + }; + tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; reg = <0 0x01f40000 0 0x40000>;
--
2.20.1