From: Fabrizio Castro <redacted>
Sent: 17 January 2019 14:54
Subject: [PATCH 3/3] dt-bindings: can: rcar_canfd: Document r8a774a1 support

Document support for rcar_canfd on R8A774A1 SoC devices.

Signed-off-by: Fabrizio Castro <redacted>
Reviewed-by: Chris Paterson <redacted>
---
This patch depends on:
https://patchwork.kernel.org/patch/10766781/

 Documentation/devicetree/bindings/net/can/rcar_canfd.txt | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt

b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
index 32f051f..fd353a9 100644

--- a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt

@@ -4,6 +4,7 @@ Renesas R-Car CAN FD controller Device Tree Bindings
 Required properties:
 - compatible: Must contain one or more of the following:
   - "renesas,rcar-gen3-canfd" for R-Car Gen3 and RZ/G2 compatible controllers.
+  - "renesas,r8a774a1-canfd" for R8A774A1 (RZ/G2M) compatible controller.
   - "renesas,r8a774c0-canfd" for R8A774C0 (RZ/G2E) compatible controller.
   - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
   - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller.

@@ -29,13 +30,13 @@ The name of the child nodes are "channel0" and "channel1" respectively. Each
 child node supports the "status" property only, which is used to
 enable/disable the respective channel.

-Required properties for "renesas,r8a774c0-canfd", "renesas,r8a7795-canfd",
-"renesas,r8a7796-canfd", "renesas,r8a77965-canfd", and "renesas,r8a77990-canfd"
-compatible:
-In R8A774C0, R8A7795, R8A7796, R8A77965, and R8A77990 SoCs, canfd clock is a
-div6 clock and can be used by both CAN and CAN FD controller at the same time.
-It needs to be scaled to maximum frequency if any of these controllers use it.
-This is done using the below properties:
+Required properties for "renesas,r8a774a1-canfd", "renesas,r8a774c0-canfd",
+"renesas,r8a7795-canfd", "renesas,r8a7796-canfd", "renesas,r8a77965-canfd", and
+"renesas,r8a77990-canfd" compatible:
+In R8A774A1, R8A774C0, R8A7795, R8A7796, R8A77965, and R8A77990 SoCs, canfd
+clock is a div6 clock and can be used by both CAN and CAN FD controller at the
+same time. It needs to be scaled to maximum frequency if any of these
+controllers use it. This is done using the below properties:

 - assigned-clocks: phandle of canfd clock.
 - assigned-clock-rates: maximum frequency of this clock.
--

2.7.4