@@ -4,6 +4,7 @@ Renesas R-Car CAN FD controller Device Tree Bindings
Required properties:
- compatible: Must contain one or more of the following:
- "renesas,rcar-gen3-canfd" for R-Car Gen3 and RZ/G2 compatible controllers.
+ - "renesas,r8a774a1-canfd" for R8A774A1 (RZ/G2M) compatible controller.
- "renesas,r8a774c0-canfd" for R8A774C0 (RZ/G2E) compatible controller.
- "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
- "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller.
@@ -29,13 +30,13 @@ The name of the child nodes are "channel0" and "channel1" respectively. Each
child node supports the "status" property only, which is used to
enable/disable the respective channel.
-Required properties for "renesas,r8a774c0-canfd", "renesas,r8a7795-canfd",
-"renesas,r8a7796-canfd", "renesas,r8a77965-canfd", and "renesas,r8a77990-canfd"
-compatible:
-In R8A774C0, R8A7795, R8A7796, R8A77965, and R8A77990 SoCs, canfd clock is a
-div6 clock and can be used by both CAN and CAN FD controller at the same time.
-It needs to be scaled to maximum frequency if any of these controllers use it.
-This is done using the below properties:
+Required properties for "renesas,r8a774a1-canfd", "renesas,r8a774c0-canfd",
+"renesas,r8a7795-canfd", "renesas,r8a7796-canfd", "renesas,r8a77965-canfd", and
+"renesas,r8a77990-canfd" compatible:
+In R8A774A1, R8A774C0, R8A7795, R8A7796, R8A77965, and R8A77990 SoCs, canfd
+clock is a div6 clock and can be used by both CAN and CAN FD controller at the
+same time. It needs to be scaled to maximum frequency if any of these
+controllers use it. This is done using the below properties:
- assigned-clocks: phandle of canfd clock.
- assigned-clock-rates: maximum frequency of this clock.