[PATCH net v2 7/7] smsc95xx: Check for Wake-on-LAN modes
STALE2926d
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2018-09-28 23:19:45
Also in:
linux-usb, lkml
Subsystem:
networking drivers, the rest, usb networking drivers, usb smsc95xx ethernet driver · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds, Steve Glendinning
Revision v2 of 2 in this series.
Revisions (2)
- v1 [diff vs current]
- v2 current
The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.
Fixes: e0e474a83c18 ("smsc95xx: add wol magic packet support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/usb/smsc95xx.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 06b4d290784d..262e7a3c23cb 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c@@ -774,6 +774,9 @@ static int smsc95xx_ethtool_set_wol(struct net_device *net, struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]); int ret; + if (wolinfo->wolopts & ~SUPPORTED_WAKE) + return -EINVAL; + pdata->wolopts = wolinfo->wolopts & SUPPORTED_WAKE; ret = device_set_wakeup_enable(&dev->udev->dev, pdata->wolopts);
--
2.17.1