[PATCH net v2 4/7] sr9800: Check for supported Wake-on-LAN modes
STALE2931d
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2018-09-28 23:19:35
Also in:
linux-usb, lkml
Subsystem:
networking drivers, the rest, usb networking drivers · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v2 of 2 in this series.
Revisions (2)
- v1 [diff vs current]
- v2 current
The driver currently silently accepts unsupported Wake-on-LAN modes
(other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user,
which is confusing.
Fixes: 19a38d8e0aa3 ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/usb/sr9800.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/usb/sr9800.c b/drivers/net/usb/sr9800.c
index 9277a0f228df..35f39f23d881 100644
--- a/drivers/net/usb/sr9800.c
+++ b/drivers/net/usb/sr9800.c@@ -421,6 +421,9 @@ sr_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) struct usbnet *dev = netdev_priv(net); u8 opt = 0; + if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC)) + return -EINVAL; + if (wolinfo->wolopts & WAKE_PHY) opt |= SR_MONITOR_LINK; if (wolinfo->wolopts & WAKE_MAGIC)
--
2.17.1