[PATCH net 5/7] r8152: Check for supported Wake-on-LAN Modes
STALE2929d
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2018-09-24 20:55:31
Also in:
linux-usb, lkml
Subsystem:
networking drivers, the rest, usb networking drivers · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v1 of 2 in this series.
Revisions (2)
- v1 current
- v2 [diff vs current]
The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.
Fixes: 21ff2e8976b1 ("r8152: support WOL")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/usb/r8152.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 2cd71bdb6484..f1b5201cc320 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c@@ -4506,6 +4506,9 @@ static int rtl8152_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) if (!rtl_can_wakeup(tp)) return -EOPNOTSUPP; + if (wol->wolopts & ~WAKE_ANY) + return -EINVAL; + ret = usb_autopm_get_interface(tp->intf); if (ret < 0) goto out_set_wol;
--
2.17.1