This patch adds a new file to add information about configuration
parameters that are supported by bnxt_en driver via devlink.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jiri Pirko <redacted>
Cc: Michael Chan <michael.chan@broadcom.com>

Signed-off-by: Vasundhara Volam <redacted>
---
 Documentation/networking/devlink-params-bnxt.txt | 35 ++++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/networking/devlink-params-bnxt.txt

diff --git a/Documentation/networking/devlink-params-bnxt.txt b/Documentation/networking/devlink-params-bnxt.txt
new file mode 100644
index 0000000..ca7c457
--- /dev/null
+++ b/Documentation/networking/devlink-params-bnxt.txt

@@ -0,0 +1,35 @@
+enable_sriov		[DEVICE, GENERIC]
+			Enable Single Root I/O Virtualisation (SRIOV) in
+			the device.
+			Type: Boolean
+			Configuration mode: Permanent
+
+ignore_ari		[DEVICE, GENERIC]
+			Ignore Alternative Routing-ID Interpretation (ARI)
+			capability. If enabled, adapter will ignore ARI
+			capability even when platforms has the support
+			enabled and creates same number of partitions when
+			platform does not support ARI.
+			Type: Boolean
+			Configuration mode: Permanent
+
+msix_vec_per_pf_max	[DEVICE, GENERIC]
+			Provides the maximum number of MSIX interrupts that
+			a device can create. Value is same across all
+			physical functions (PFs) in the device.
+			Type: u32
+			Configuration mode: Permanent
+
+msix_vec_per_pf_min	[DEVICE, GENERIC]
+			Provides the minimum number of MSIX interrupts required
+			or the device initialization. Value is same across all
+			physical functions (PFs) in the device.
+			Type: u32
+			Configuration mode: Permanent