[PATCH net-next v2 13/13] arm64: dts: marvell: 8040-db: describe the 10G SFP cages
From: Antoine Tenart <hidden>
Date: 2018-05-04 14:01:08
Also in:
linux-arm-kernel, lkml
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds
This patch adds the SFP cages description for the 10G interfaces in the Marvell Armada 8080 DB board. Signed-off-by: Antoine Tenart <redacted> --- arch/arm64/boot/dts/marvell/armada-8040-db.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 5689fb23bbab..0a9aeac71614 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts@@ -70,6 +70,14 @@ compatible = "usb-nop-xceiv"; vcc-supply = <&cp1_reg_usb3_0_vbus>; }; + + sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + }; + + sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + }; }; &i2c0 {
@@ -177,6 +185,8 @@ &cp0_eth0 { status = "okay"; phy-mode = "10gbase-kr"; + managed = "in-band-status"; + sfp = <&sfp_eth0>; }; &cp0_eth2 {
@@ -303,6 +313,8 @@ &cp1_eth0 { status = "okay"; phy-mode = "10gbase-kr"; + managed = "in-band-status"; + sfp = <&sfp_eth1>; }; &cp1_eth1 {
--
2.17.0