-----Original Message-----
From: Michael Chan [mailto:michael.chan@broadcom.com]
Sent: Monday, December 11, 2017 5:11 PM
To: davem@davemloft.net
Cc: netdev@vger.kernel.org; andrew.gospodarek@broadcom.com; Elior, Ariel
[off-list ref]; Dept-Eng Everest Linux L2 <Dept-
EngEverestLinuxL2@cavium.com>
Subject: [PATCH net-next v4 4/5] bnx2x: Use NETIF_F_GRO_HW.

Advertise NETIF_F_GRO_HW and turn on TPA_MODE_GRO when
NETIF_F_GRO_HW is set.  Disable NETIF_F_GRO_HW in bnx2x_fix_features() if
the MTU does not support TPA_MODE_GRO or GRO is not set.
bnx2x_change_mtu() also needs to disable NETIF_F_GRO_HW if the MTU does
not support it.

Cc: Ariel Elior <redacted>
Cc: everest-linux-l2@cavium.com
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c  | 19 ++++++++++++-------
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c |  4 +++-
 2 files changed, 15 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c

b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 4c739d5..f9b18a7 100644

--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c

@@ -2482,8 +2482,7 @@ static void bnx2x_bz_fp(struct bnx2x *bp, int index)
 	 */
 	if (bp->dev->features & NETIF_F_LRO)
 		fp->mode = TPA_MODE_LRO;
-	else if (bp->dev->features & NETIF_F_GRO &&
-		 bnx2x_mtu_allows_gro(bp->dev->mtu))
+	else if (bp->dev->features & NETIF_F_GRO_HW)
 		fp->mode = TPA_MODE_GRO;
 	else
 		fp->mode = TPA_MODE_DISABLED;

@@ -4874,6 +4873,9 @@ int bnx2x_change_mtu(struct net_device *dev, int

new_mtu)
 	 */
 	dev->mtu = new_mtu;

+	if (!bnx2x_mtu_allows_gro(new_mtu))
+		dev->features &= ~NETIF_F_GRO_HW;
+
 	if (IS_PF(bp) && SHMEM2_HAS(bp, curr_cfg))
 		SHMEM2_WR(bp, curr_cfg, CURR_CFG_MET_OS);

@@ -4907,6 +4909,10 @@ netdev_features_t bnx2x_fix_features(struct

net_device *dev,
 		features &= ~NETIF_F_LRO;
 		features &= ~NETIF_F_GRO;
 	}
+	if (!(features & NETIF_F_GRO) || !bnx2x_mtu_allows_gro(dev->mtu))
+		features &= ~NETIF_F_GRO_HW;
+	if (features & NETIF_F_GRO_HW)
+		features &= ~NETIF_F_LRO;

 	return features;
 }

@@ -4933,13 +4939,12 @@ int bnx2x_set_features(struct net_device *dev,

netdev_features_t features)
 		}
 	}

-	/* if GRO is changed while LRO is enabled, don't force a reload */
-	if ((changes & NETIF_F_GRO) && (features & NETIF_F_LRO))
-		changes &= ~NETIF_F_GRO;
+	/* Don't care about GRO changes */
+	changes &= ~NETIF_F_GRO;

 	/* if GRO is changed while HW TPA is off, don't force a reload */
-	if ((changes & NETIF_F_GRO) && bp->disable_tpa)
-		changes &= ~NETIF_F_GRO;
+	if ((changes & NETIF_F_GRO_HW) && bp->disable_tpa)
+		changes &= ~NETIF_F_GRO_HW;

 	if (changes)
 		bnx2x_reload = true;

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 91e2a75..1c7f821 100644

--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

@@ -13273,7 +13273,7 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct

pci_dev *pdev,

 	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
NETIF_F_IPV6_CSUM |
 		NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 |
-		NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_GRO |
+		NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_GRO |
NETIF_F_GRO_HW |
 		NETIF_F_RXHASH | NETIF_F_HW_VLAN_CTAG_TX;
 	if (!chip_is_e1x) {
 		dev->hw_features |= NETIF_F_GSO_GRE |
NETIF_F_GSO_GRE_CSUM | @@ -13309,6 +13309,8 @@ static int
bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev,

 	dev->features |= dev->hw_features | NETIF_F_HW_VLAN_CTAG_RX;
 	dev->features |= NETIF_F_HIGHDMA;
+	if (dev->features & NETIF_F_GRO_HW)
+		dev->features &= ~NETIF_F_LRO;

 	/* Add Loopback capability to the device */
 	dev->hw_features |= NETIF_F_LOOPBACK;
--
1.8.3.1