Re: [jkirsher/next-queue PATCH v4 0/6] tc-flower based cloud filters in i40e
From: Jiri Pirko <jiri@resnulli.us>
Date: 2017-10-11 12:56:37
Also in:
intel-wired-lan
Wed, Oct 11, 2017 at 02:24:12AM CEST, amritha.nambiar@intel.com wrote:
This patch series enables configuring cloud filters in i40e using the tc-flower classifier. The classification function of the filter is to match a packet to a class. cls_flower is extended to offload classid to hardware. The offloaded classid is used direct matched packets to a traffic class on the device. The approach here is similar to the tc 'prio' qdisc which uses the classid for band selection. The ingress qdisc is called ffff:0, so traffic classes are ffff:1 to ffff:8 (i40e has max of 8 TCs).
NACK. This clearly looks like abuse of classid to something else. Classid is here to identify qdisc instance. However, you use it for hw tclass identification. This is mixing of apples and oranges. Why? Please don't try to abuse things! This is not nice.
TC0 is minor number 1, TC1 is minor number 2 etc.
The cloud filters are added for a VSI and are cleaned up when
the VSI is deleted. The filters that match on L4 ports needs
enhanced admin queue functions with big buffer support for
extended fields in cloud filter commands.
Example:
# tc qdisc add dev eth0 ingress
# ethtool -K eth0 hw-tc-offload on
Match Dst IPv4,Dst Port and route to TC1:
# tc filter add dev eth0 protocol ip parent ffff: prio 1 flower\
dst_ip 192.168.1.1/32 ip_proto udp dst_port 22\
skip_sw classid ffff:2
# tc filter show dev eth0 parent ffff:
filter pref 1 flower chain 0
filter pref 1 flower chain 0 handle 0x1 classid ffff:2
eth_type ipv4
ip_proto udp
dst_ip 192.168.1.1
dst_port 22
skip_sw
in_hw
v4: classid based approach to set traffic class for matched packets.
Authors:
Amritha Nambiar [off-list ref]
Kiran Patil [off-list ref]
Anjali Singhai Jain [off-list ref]
Jingjing Wu [off-list ref]
---
Amritha Nambiar (6):
cls_flower: Offload classid to hardware
i40e: Map TCs with the VSI seids
i40e: Cloud filter mode for set_switch_config command
i40e: Admin queue definitions for cloud filters
i40e: Clean up of cloud filters
i40e: Enable cloud filters via tc-flower
drivers/net/ethernet/intel/i40e/i40e.h | 55 +
drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h | 143 +++
drivers/net/ethernet/intel/i40e/i40e_common.c | 193 ++++
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 2
drivers/net/ethernet/intel/i40e/i40e_main.c | 941 +++++++++++++++++++-
drivers/net/ethernet/intel/i40e/i40e_prototype.h | 18
drivers/net/ethernet/intel/i40e/i40e_type.h | 10
.../net/ethernet/intel/i40evf/i40e_adminq_cmd.h | 113 ++
include/net/pkt_cls.h | 1
net/sched/cls_flower.c | 2
10 files changed, 1439 insertions(+), 39 deletions(-)
--