[net-next 1/2] dummy: add device MTU validation check
From: Zhang Shengju <hidden>
Date: 2017-09-21 13:32:23
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Currently, any mtu value can be assigned when adding a new dummy device:
[~]# ip link add name dummy1 mtu 100000 type dummy
[~]# ip link show dummy1
15: dummy1: <BROADCAST,NOARP> mtu 100000 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 0a:61:6b:16:14:ce brd ff:ff:ff:ff:ff:ff
This patch adds device MTU validation check.
Signed-off-by: Zhang Shengju <redacted>
---
drivers/net/dummy.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/dummy.c b/drivers/net/dummy.c
index e31ab3b..0276b2b 100644
--- a/drivers/net/dummy.c
+++ b/drivers/net/dummy.c@@ -365,6 +365,14 @@ static int dummy_validate(struct nlattr *tb[], struct nlattr *data[], if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS]))) return -EADDRNOTAVAIL; } + + if (tb[IFLA_MTU]) { + u32 mtu = nla_get_u32(tb[IFLA_MTU]); + + if (mtu > ETH_MAX_MTU) + return -EINVAL; + } + return 0; }
--
1.8.3.1