[PATCH net-next v3 09/12] net: dsa: b53: Wire-up EEE
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-09-19 17:47:26
Subsystem:
broadcom b53/sf2 ethernet switch driver, networking drivers, networking [dsa], the rest · Maintainers:
Florian Fainelli, Jonas Gorski, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds
Add support for enabling and disabling EEE, as well as re-negotiating it in .adjust_link() and in .port_enable(). Reviewed-by: Vivien Didelot <redacted> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/net/dsa/b53/b53_common.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 491e4ffa8a0e..4e37ec27e496 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c@@ -523,6 +523,10 @@ static int b53_enable_port(struct dsa_switch *ds, int port, b53_imp_vlan_setup(ds, cpu_port); + /* If EEE was enabled, restore it */ + if (dev->ports[port].eee.eee_enabled) + b53_eee_enable_set(ds, port, true); + return 0; }
@@ -879,6 +883,7 @@ static void b53_adjust_link(struct dsa_switch *ds, int port, struct phy_device *phydev) { struct b53_device *dev = ds->priv; + struct ethtool_eee *p = &dev->ports[port].eee; u8 rgmii_ctrl = 0, reg = 0, off; if (!phy_is_pseudo_fixed_link(phydev))
@@ -1000,6 +1005,9 @@ static void b53_adjust_link(struct dsa_switch *ds, int port, b53_write8(dev, B53_CTRL_PAGE, po_reg, gmii_po); } } + + /* Re-negotiate EEE if it was enabled already */ + p->eee_enabled = b53_eee_init(ds, port, phydev); } int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
@@ -1605,6 +1613,8 @@ static const struct dsa_switch_ops b53_switch_ops = { .adjust_link = b53_adjust_link, .port_enable = b53_enable_port, .port_disable = b53_disable_port, + .get_mac_eee = b53_get_mac_eee, + .set_mac_eee = b53_set_mac_eee, .port_bridge_join = b53_br_join, .port_bridge_leave = b53_br_leave, .port_stp_state_set = b53_br_set_stp_state,
--
2.9.3