[PATCH net-next v3 00/12] net: dsa: b53/bcm_sf2 cleanups

STALE3274d

Revision v3 of 3 in this series.

14 messages, 2 authors, 2017-09-19 · open the first message on its own page

[PATCH net-next v3 00/12] net: dsa: b53/bcm_sf2 cleanups

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-09-19 17:47:04

Hi all,

This patch series is a first pass set of clean-ups to reduce the number of LOCs
between b53 and bcm_sf2 and sharing as many functions as possible.

There is a number of additional cleanups queued up locally that require more
thorough testing.

Thanks!

Changes in v3:

- remove one extra argument for the b53_build_io_op macro (David Laight)
- added additional Reviewed-by tags from Vivien

Changes in v2:

- added Reviewed-by tags from Vivien
- added a missing EXPORT_SYMBOL() in patch 8
- fixed a typo in patch 5

Florian Fainelli (12):
  net: dsa: b53: Remove is_cpu_port()
  net: dsa: b53: Make b53_enable_cpu_port() take a port argument
  net: dsa: b53: Defer port enabling to calling port_enable
  net: dsa: bcm_sf2: Defer port enabling to calling port_enable
  net: dsa: b53: Use a macro to define I/O operations
  net: dsa: b53: Move Broadcom header setup to b53
  net: dsa: b53: Define EEE register page
  net: dsa: b53: Move EEE functions to b53
  net: dsa: b53: Wire-up EEE
  net: dsa: b53: Export b53_imp_vlan_setup()
  net: dsa: bcm_sf2: Use SF2_NUM_EGRESS_QUEUES for CFP
  net: dsa: bcm_sf2: Utilize b53_{enable,disable}_port

 drivers/net/dsa/b53/b53_common.c | 151 ++++++++++++++++++++++++++++++++----
 drivers/net/dsa/b53/b53_priv.h   | 145 ++++++++---------------------------
 drivers/net/dsa/b53/b53_regs.h   |  48 ++++++++++++
 drivers/net/dsa/bcm_sf2.c        | 161 +++------------------------------------
 drivers/net/dsa/bcm_sf2.h        |   2 -
 drivers/net/dsa/bcm_sf2_cfp.c    |   6 +-
 drivers/net/dsa/bcm_sf2_regs.h   |  11 ---
 7 files changed, 228 insertions(+), 296 deletions(-)

-- 
2.9.3

[PATCH net-next v3 01/12] net: dsa: b53: Remove is_cpu_port()

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-09-19 17:47:06

This is not used anywhere, so remove it.

Reviewed-by: Vivien Didelot <redacted>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_priv.h | 5 -----
 1 file changed, 5 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 01bd8cbe9a3f..7528b22aeb03 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -186,11 +186,6 @@ static inline int is58xx(struct b53_device *dev)
 #define B53_CPU_PORT_25	5
 #define B53_CPU_PORT	8
 
-static inline int is_cpu_port(struct b53_device *dev, int port)
-{
-	return dev->cpu_port;
-}
-
 struct b53_device *b53_switch_alloc(struct device *base,
 				    const struct b53_io_ops *ops,
 				    void *priv);
-- 
2.9.3

[PATCH net-next v3 02/12] net: dsa: b53: Make b53_enable_cpu_port() take a port argument

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-09-19 17:47:09

In preparation for future changes allowing the configuring of multiple
CPU ports, make b53_enable_cpu_port() take a port argument.

Reviewed-by: Vivien Didelot <redacted>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 274f3679f33d..d8bc54cfcfbe 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -538,19 +538,18 @@ static void b53_disable_port(struct dsa_switch *ds, int port,
 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
 }
 
-static void b53_enable_cpu_port(struct b53_device *dev)
+static void b53_enable_cpu_port(struct b53_device *dev, int port)
 {
-	unsigned int cpu_port = dev->cpu_port;
 	u8 port_ctrl;
 
 	/* BCM5325 CPU port is at 8 */
-	if ((is5325(dev) || is5365(dev)) && cpu_port == B53_CPU_PORT_25)
-		cpu_port = B53_CPU_PORT;
+	if ((is5325(dev) || is5365(dev)) && port == B53_CPU_PORT_25)
+		port = B53_CPU_PORT;
 
 	port_ctrl = PORT_CTRL_RX_BCST_EN |
 		    PORT_CTRL_RX_MCST_EN |
 		    PORT_CTRL_RX_UCST_EN;
-	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(cpu_port), port_ctrl);
+	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl);
 }
 
 static void b53_enable_mib(struct b53_device *dev)
@@ -820,7 +819,7 @@ static int b53_setup(struct dsa_switch *ds)
 		if (BIT(port) & ds->enabled_port_mask)
 			b53_enable_port(ds, port, NULL);
 		else if (dsa_is_cpu_port(ds, port))
-			b53_enable_cpu_port(dev);
+			b53_enable_cpu_port(dev, port);
 		else
 			b53_disable_port(ds, port, NULL);
 	}
-- 
2.9.3

[PATCH net-next v3 03/12] net: dsa: b53: Defer port enabling to calling port_enable

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-09-19 17:47:11

There is no need to configure the enabled ports once in b53_setup() and then a
second time around when dsa_switch_ops::port_enable is called, just do it when
port_enable is called which is better in terms of power consumption and
correctness.

Reviewed-by: Vivien Didelot <redacted>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index d8bc54cfcfbe..3297af6aab8a 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -815,12 +815,13 @@ static int b53_setup(struct dsa_switch *ds)
 	if (ret)
 		dev_err(ds->dev, "failed to apply configuration\n");
 
+	/* Configure IMP/CPU port, disable unused ports. Enabled
+	 * ports will be configured with .port_enable
+	 */
 	for (port = 0; port < dev->num_ports; port++) {
-		if (BIT(port) & ds->enabled_port_mask)
-			b53_enable_port(ds, port, NULL);
-		else if (dsa_is_cpu_port(ds, port))
+		if (dsa_is_cpu_port(ds, port))
 			b53_enable_cpu_port(dev, port);
-		else
+		else if (!(BIT(port) & ds->enabled_port_mask))
 			b53_disable_port(ds, port, NULL);
 	}
 
-- 
2.9.3

[PATCH net-next v3 04/12] net: dsa: bcm_sf2: Defer port enabling to calling port_enable

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-09-19 17:47:14

There is no need to configure the enabled ports once in bcm_sf2_sw_setup() and
then a second time around when dsa_switch_ops::port_enable is called, just do
it when port_enable is called which is better in terms of power consumption and
correctness.

Reviewed-by: Vivien Didelot <redacted>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/bcm_sf2.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index d7b53d53c116..8acbd17bc1fd 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -890,14 +890,11 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds)
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
 	unsigned int port;
 
-	/* Enable all valid ports and disable those unused */
+	/* Disable unused ports and configure IMP port */
 	for (port = 0; port < priv->hw_params.num_ports; port++) {
-		/* IMP port receives special treatment */
-		if ((1 << port) & ds->enabled_port_mask)
-			bcm_sf2_port_setup(ds, port, NULL);
-		else if (dsa_is_cpu_port(ds, port))
+		if (dsa_is_cpu_port(ds, port))
 			bcm_sf2_imp_setup(ds, port);
-		else
+		else if (!((1 << port) & ds->enabled_port_mask))
 			bcm_sf2_port_disable(ds, port, NULL);
 	}
 
-- 
2.9.3

[PATCH net-next v3 05/12] net: dsa: b53: Use a macro to define I/O operations

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-09-19 17:47:16

Instead of repeating the same pattern: acquire mutex, read/write,
release mutex, define a macro: b53_build_op() which takes the type
(read|write), I/O size, and value (scalar or pointer). This helps with
fixing bugs that could exist (e.g: missing barrier, lock etc.).

Reviewed-by: Vivien Didelot <redacted>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_priv.h | 133 +++++++----------------------------------
 1 file changed, 22 insertions(+), 111 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 7528b22aeb03..5bebe97900e8 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -199,119 +199,30 @@ static inline void b53_switch_remove(struct b53_device *dev)
 	dsa_unregister_switch(dev->ds);
 }
 
-static inline int b53_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->read8(dev, page, reg, val);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int b53_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->read16(dev, page, reg, val);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int b53_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->read32(dev, page, reg, val);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int b53_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->read48(dev, page, reg, val);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
+#define b53_build_op(type_op_size, val_type)				\
+static inline int b53_##type_op_size(struct b53_device *dev, u8 page,	\
+				     u8 reg, val_type val)		\
+{									\
+	int ret;							\
+									\
+	mutex_lock(&dev->reg_mutex);					\
+	ret = dev->ops->type_op_size(dev, page, reg, val);		\
+	mutex_unlock(&dev->reg_mutex);					\
+									\
+	return ret;							\
 }
 
-static inline int b53_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->read64(dev, page, reg, val);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int b53_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->write8(dev, page, reg, value);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int b53_write16(struct b53_device *dev, u8 page, u8 reg,
-			      u16 value)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->write16(dev, page, reg, value);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int b53_write32(struct b53_device *dev, u8 page, u8 reg,
-			      u32 value)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->write32(dev, page, reg, value);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int b53_write48(struct b53_device *dev, u8 page, u8 reg,
-			      u64 value)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->write48(dev, page, reg, value);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int b53_write64(struct b53_device *dev, u8 page, u8 reg,
-			       u64 value)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->write64(dev, page, reg, value);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
+b53_build_op(read8, u8 *);
+b53_build_op(read16, u16 *);
+b53_build_op(read32, u32 *);
+b53_build_op(read48, u64 *);
+b53_build_op(read64, u64 *);
+
+b53_build_op(write8, u8);
+b53_build_op(write16, u16);
+b53_build_op(write32, u32);
+b53_build_op(write48, u64);
+b53_build_op(write64, u64);
 
 struct b53_arl_entry {
 	u8 port;
-- 
2.9.3

[PATCH net-next v3 06/12] net: dsa: b53: Move Broadcom header setup to b53

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-09-19 17:47:19

The code to enable Broadcom tags/headers is largely switch independent,
and in preparation for enabling it for multiple devices with b53, move
the code we have in bcm_sf2.c to b53_common.c

Reviewed-by: Vivien Didelot <redacted>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 47 ++++++++++++++++++++++++++++++++++++++++
 drivers/net/dsa/b53/b53_priv.h   |  1 +
 drivers/net/dsa/b53/b53_regs.h   |  7 ++++++
 drivers/net/dsa/bcm_sf2.c        | 43 ++----------------------------------
 drivers/net/dsa/bcm_sf2_regs.h   |  8 -------
 5 files changed, 57 insertions(+), 49 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 3297af6aab8a..aa2187c71ea5 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -538,6 +538,53 @@ static void b53_disable_port(struct dsa_switch *ds, int port,
 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
 }
 
+void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
+{
+	struct b53_device *dev = ds->priv;
+	u8 hdr_ctl, val;
+	u16 reg;
+
+	/* Resolve which bit controls the Broadcom tag */
+	switch (port) {
+	case 8:
+		val = BRCM_HDR_P8_EN;
+		break;
+	case 7:
+		val = BRCM_HDR_P7_EN;
+		break;
+	case 5:
+		val = BRCM_HDR_P5_EN;
+		break;
+	default:
+		val = 0;
+		break;
+	}
+
+	/* Enable Broadcom tags for IMP port */
+	b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl);
+	hdr_ctl |= val;
+	b53_write8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, hdr_ctl);
+
+	/* Registers below are only accessible on newer devices */
+	if (!is58xx(dev))
+		return;
+
+	/* Enable reception Broadcom tag for CPU TX (switch RX) to
+	 * allow us to tag outgoing frames
+	 */
+	b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, &reg);
+	reg &= ~BIT(port);
+	b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, reg);
+
+	/* Enable transmission of Broadcom tags from the switch (CPU RX) to
+	 * allow delivering frames to the per-port net_devices
+	 */
+	b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, &reg);
+	reg &= ~BIT(port);
+	b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, reg);
+}
+EXPORT_SYMBOL(b53_brcm_hdr_setup);
+
 static void b53_enable_cpu_port(struct b53_device *dev, int port)
 {
 	u8 port_ctrl;
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 5bebe97900e8..77102f685da0 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -309,5 +309,6 @@ int b53_mirror_add(struct dsa_switch *ds, int port,
 		   struct dsa_mall_mirror_tc_entry *mirror, bool ingress);
 void b53_mirror_del(struct dsa_switch *ds, int port,
 		    struct dsa_mall_mirror_tc_entry *mirror);
+void b53_brcm_hdr_setup(struct dsa_switch *ds, int port);
 
 #endif
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index e5c86d44667a..5e8b8e31fee8 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -210,6 +210,7 @@
 #define B53_BRCM_HDR			0x03
 #define   BRCM_HDR_P8_EN		BIT(0) /* Enable tagging on port 8 */
 #define   BRCM_HDR_P5_EN		BIT(1) /* Enable tagging on port 5 */
+#define   BRCM_HDR_P7_EN		BIT(2) /* Enable tagging on port 7 */
 
 /* Mirror capture control register (16 bit) */
 #define B53_MIR_CAP_CTL			0x10
@@ -249,6 +250,12 @@
 /* Revision ID register (8 bit) */
 #define B53_REV_ID			0x40
 
+/* Broadcom header RX control (16 bit) */
+#define B53_BRCM_HDR_RX_DIS		0x60
+
+/* Broadcom header TX control (16 bit)	*/
+#define B53_BRCM_HDR_TX_DIS		0x62
+
 /*************************************************************************
  * ARL Access Page Registers
  *************************************************************************/
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 8acbd17bc1fd..49cb51223f70 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -60,45 +60,6 @@ static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
 	}
 }
 
-static void bcm_sf2_brcm_hdr_setup(struct bcm_sf2_priv *priv, int port)
-{
-	u32 reg, val;
-
-	/* Resolve which bit controls the Broadcom tag */
-	switch (port) {
-	case 8:
-		val = BRCM_HDR_EN_P8;
-		break;
-	case 7:
-		val = BRCM_HDR_EN_P7;
-		break;
-	case 5:
-		val = BRCM_HDR_EN_P5;
-		break;
-	default:
-		val = 0;
-		break;
-	}
-
-	/* Enable Broadcom tags for IMP port */
-	reg = core_readl(priv, CORE_BRCM_HDR_CTRL);
-	reg |= val;
-	core_writel(priv, reg, CORE_BRCM_HDR_CTRL);
-
-	/* Enable reception Broadcom tag for CPU TX (switch RX) to
-	 * allow us to tag outgoing frames
-	 */
-	reg = core_readl(priv, CORE_BRCM_HDR_RX_DIS);
-	reg &= ~(1 << port);
-	core_writel(priv, reg, CORE_BRCM_HDR_RX_DIS);
-
-	/* Enable transmission of Broadcom tags from the switch (CPU RX) to
-	 * allow delivering frames to the per-port net_devices
-	 */
-	reg = core_readl(priv, CORE_BRCM_HDR_TX_DIS);
-	reg &= ~(1 << port);
-	core_writel(priv, reg, CORE_BRCM_HDR_TX_DIS);
-}
 
 static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 {
@@ -138,7 +99,7 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 		reg |= i << (PRT_TO_QID_SHIFT * i);
 	core_writel(priv, reg, CORE_PORT_TC2_QOS_MAP_PORT(port));
 
-	bcm_sf2_brcm_hdr_setup(priv, port);
+	b53_brcm_hdr_setup(ds, port);
 
 	/* Force link status for IMP port */
 	reg = core_readl(priv, offset);
@@ -247,7 +208,7 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
 
 	/* Enable Broadcom tags for that port if requested */
 	if (priv->brcm_tag_mask & BIT(port))
-		bcm_sf2_brcm_hdr_setup(priv, port);
+		b53_brcm_hdr_setup(ds, port);
 
 	/* Configure Traffic Class to QoS mapping, allow each priority to map
 	 * to a different queue number
diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
index 49695fcc2ea8..788361ad68a0 100644
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -205,16 +205,8 @@ enum bcm_sf2_reg_offs {
 
 #define CORE_IMP0_PRT_ID		0x0804
 
-#define CORE_BRCM_HDR_CTRL		0x0080c
-#define  BRCM_HDR_EN_P8			(1 << 0)
-#define  BRCM_HDR_EN_P5			(1 << 1)
-#define  BRCM_HDR_EN_P7			(1 << 2)
-
 #define CORE_RST_MIB_CNT_EN		0x0950
 
-#define CORE_BRCM_HDR_RX_DIS		0x0980
-#define CORE_BRCM_HDR_TX_DIS		0x0988
-
 #define CORE_ARLA_VTBL_RWCTRL		0x1600
 #define  ARLA_VTBL_CMD_WRITE		0
 #define  ARLA_VTBL_CMD_READ		1
-- 
2.9.3

[PATCH net-next v3 07/12] net: dsa: b53: Define EEE register page

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-09-19 17:47:21

In preparation for migrating the EEE code from bcm_sf2 to b53, define the full
EEE register page and offsets within that page.

Reviewed-by: Vivien Didelot <redacted>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_regs.h | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index 5e8b8e31fee8..2a9f421680aa 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -50,6 +50,9 @@
 /* Jumbo Frame Registers */
 #define B53_JUMBO_PAGE			0x40
 
+/* EEE Control Registers Page */
+#define B53_EEE_PAGE			0x92
+
 /* CFP Configuration Registers Page */
 #define B53_CFP_PAGE			0xa1
 
@@ -472,6 +475,44 @@
 #define   JMS_MAX_SIZE			9724
 
 /*************************************************************************
+ * EEE Configuration Page Registers
+ *************************************************************************/
+
+/* EEE Enable control register (16 bit) */
+#define B53_EEE_EN_CTRL			0x00
+
+/* EEE LPI assert status register (16 bit) */
+#define B53_EEE_LPI_ASSERT_STS		0x02
+
+/* EEE LPI indicate status register (16 bit) */
+#define B53_EEE_LPI_INDICATE		0x4
+
+/* EEE Receiving idle symbols status register (16 bit) */
+#define B53_EEE_RX_IDLE_SYM_STS		0x6
+
+/* EEE Pipeline timer register (32 bit) */
+#define B53_EEE_PIP_TIMER		0xC
+
+/* EEE Sleep timer Gig register (32 bit) */
+#define B53_EEE_SLEEP_TIMER_GIG(i)	(0x10 + 4 * (i))
+
+/* EEE Sleep timer FE register (32 bit) */
+#define B53_EEE_SLEEP_TIMER_FE(i)	(0x34 + 4 * (i))
+
+/* EEE Minimum LP timer Gig register (32 bit) */
+#define B53_EEE_MIN_LP_TIMER_GIG(i)	(0x58 + 4 * (i))
+
+/* EEE Minimum LP timer FE register (32 bit) */
+#define B53_EEE_MIN_LP_TIMER_FE(i)	(0x7c + 4 * (i))
+
+/* EEE Wake timer Gig register (16 bit) */
+#define B53_EEE_WAKE_TIMER_GIG(i)	(0xa0 + 2 * (i))
+
+/* EEE Wake timer FE register (16 bit) */
+#define B53_EEE_WAKE_TIMER_FE(i)	(0xb2 + 2 * (i))
+
+
+/*************************************************************************
  * CFP Configuration Page Registers
  *************************************************************************/
 
-- 
2.9.3

[PATCH net-next v3 08/12] net: dsa: b53: Move EEE functions to b53

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-09-19 17:47:23

Move the bcm_sf2 EEE-related functions to the b53 driver because this is shared
code amongst Gigabit capable switch, only 5325 and 5365 are too old to support
that.

Reviewed-by: Vivien Didelot <redacted>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 63 ++++++++++++++++++++++++++++++++++++++
 drivers/net/dsa/b53/b53_priv.h   |  5 +++
 drivers/net/dsa/bcm_sf2.c        | 66 ++++------------------------------------
 drivers/net/dsa/bcm_sf2.h        |  2 --
 drivers/net/dsa/bcm_sf2_regs.h   |  3 --
 5 files changed, 74 insertions(+), 65 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index aa2187c71ea5..491e4ffa8a0e 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1531,6 +1531,69 @@ void b53_mirror_del(struct dsa_switch *ds, int port,
 }
 EXPORT_SYMBOL(b53_mirror_del);
 
+void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
+{
+	struct b53_device *dev = ds->priv;
+	u16 reg;
+
+	b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, &reg);
+	if (enable)
+		reg |= BIT(port);
+	else
+		reg &= ~BIT(port);
+	b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg);
+}
+EXPORT_SYMBOL(b53_eee_enable_set);
+
+
+/* Returns 0 if EEE was not enabled, or 1 otherwise
+ */
+int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
+{
+	int ret;
+
+	ret = phy_init_eee(phy, 0);
+	if (ret)
+		return 0;
+
+	b53_eee_enable_set(ds, port, true);
+
+	return 1;
+}
+EXPORT_SYMBOL(b53_eee_init);
+
+int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
+{
+	struct b53_device *dev = ds->priv;
+	struct ethtool_eee *p = &dev->ports[port].eee;
+	u16 reg;
+
+	if (is5325(dev) || is5365(dev))
+		return -EOPNOTSUPP;
+
+	b53_read16(dev, B53_EEE_PAGE, B53_EEE_LPI_INDICATE, &reg);
+	e->eee_enabled = p->eee_enabled;
+	e->eee_active = !!(reg & BIT(port));
+
+	return 0;
+}
+EXPORT_SYMBOL(b53_get_mac_eee);
+
+int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
+{
+	struct b53_device *dev = ds->priv;
+	struct ethtool_eee *p = &dev->ports[port].eee;
+
+	if (is5325(dev) || is5365(dev))
+		return -EOPNOTSUPP;
+
+	p->eee_enabled = e->eee_enabled;
+	b53_eee_enable_set(ds, port, e->eee_enabled);
+
+	return 0;
+}
+EXPORT_SYMBOL(b53_set_mac_eee);
+
 static const struct dsa_switch_ops b53_switch_ops = {
 	.get_tag_protocol	= b53_get_tag_protocol,
 	.setup			= b53_setup,
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 77102f685da0..aabe80eab25d 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -70,6 +70,7 @@ enum {
 
 struct b53_port {
 	u16		vlan_ctl_mask;
+	struct ethtool_eee eee;
 };
 
 struct b53_vlan {
@@ -310,5 +311,9 @@ int b53_mirror_add(struct dsa_switch *ds, int port,
 void b53_mirror_del(struct dsa_switch *ds, int port,
 		    struct dsa_mall_mirror_tc_entry *mirror);
 void b53_brcm_hdr_setup(struct dsa_switch *ds, int port);
+void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable);
+int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy);
+int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e);
+int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e);
 
 #endif
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 49cb51223f70..4e8ef4c07eab 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -107,19 +107,6 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 	core_writel(priv, reg, offset);
 }
 
-static void bcm_sf2_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
-{
-	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	u32 reg;
-
-	reg = core_readl(priv, CORE_EEE_EN_CTRL);
-	if (enable)
-		reg |= 1 << port;
-	else
-		reg &= ~(1 << port);
-	core_writel(priv, reg, CORE_EEE_EN_CTRL);
-}
-
 static void bcm_sf2_gphy_enable_set(struct dsa_switch *ds, bool enable)
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
@@ -256,8 +243,8 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
 	bcm_sf2_imp_vlan_setup(ds, cpu_port);
 
 	/* If EEE was enabled, restore it */
-	if (priv->port_sts[port].eee.eee_enabled)
-		bcm_sf2_eee_enable_set(ds, port, true);
+	if (priv->dev->ports[port].eee.eee_enabled)
+		b53_eee_enable_set(ds, port, true);
 
 	return 0;
 }
@@ -292,47 +279,6 @@ static void bcm_sf2_port_disable(struct dsa_switch *ds, int port,
 	core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
 }
 
-/* Returns 0 if EEE was not enabled, or 1 otherwise
- */
-static int bcm_sf2_eee_init(struct dsa_switch *ds, int port,
-			    struct phy_device *phy)
-{
-	int ret;
-
-	ret = phy_init_eee(phy, 0);
-	if (ret)
-		return 0;
-
-	bcm_sf2_eee_enable_set(ds, port, true);
-
-	return 1;
-}
-
-static int bcm_sf2_sw_get_mac_eee(struct dsa_switch *ds, int port,
-				  struct ethtool_eee *e)
-{
-	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	struct ethtool_eee *p = &priv->port_sts[port].eee;
-	u32 reg;
-
-	reg = core_readl(priv, CORE_EEE_LPI_INDICATE);
-	e->eee_enabled = p->eee_enabled;
-	e->eee_active = !!(reg & (1 << port));
-
-	return 0;
-}
-
-static int bcm_sf2_sw_set_mac_eee(struct dsa_switch *ds, int port,
-				  struct ethtool_eee *e)
-{
-	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	struct ethtool_eee *p = &priv->port_sts[port].eee;
-
-	p->eee_enabled = e->eee_enabled;
-	bcm_sf2_eee_enable_set(ds, port, e->eee_enabled);
-
-	return 0;
-}
 
 static int bcm_sf2_sw_indir_rw(struct bcm_sf2_priv *priv, int op, int addr,
 			       int regnum, u16 val)
@@ -567,7 +513,7 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
 				   struct phy_device *phydev)
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	struct ethtool_eee *p = &priv->port_sts[port].eee;
+	struct ethtool_eee *p = &priv->dev->ports[port].eee;
 	u32 id_mode_dis = 0, port_mode;
 	const char *str = NULL;
 	u32 reg, offset;
@@ -649,7 +595,7 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
 	core_writel(priv, reg, offset);
 
 	if (!phydev->is_pseudo_fixed_link)
-		p->eee_enabled = bcm_sf2_eee_init(ds, port, phydev);
+		p->eee_enabled = b53_eee_init(ds, port, phydev);
 }
 
 static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
@@ -978,8 +924,8 @@ static const struct dsa_switch_ops bcm_sf2_ops = {
 	.set_wol		= bcm_sf2_sw_set_wol,
 	.port_enable		= bcm_sf2_port_setup,
 	.port_disable		= bcm_sf2_port_disable,
-	.get_mac_eee		= bcm_sf2_sw_get_mac_eee,
-	.set_mac_eee		= bcm_sf2_sw_set_mac_eee,
+	.get_mac_eee		= b53_get_mac_eee,
+	.set_mac_eee		= b53_set_mac_eee,
 	.port_bridge_join	= b53_br_join,
 	.port_bridge_leave	= b53_br_leave,
 	.port_stp_state_set	= b53_br_set_stp_state,
diff --git a/drivers/net/dsa/bcm_sf2.h b/drivers/net/dsa/bcm_sf2.h
index 02c499f9c56b..1922e027ff59 100644
--- a/drivers/net/dsa/bcm_sf2.h
+++ b/drivers/net/dsa/bcm_sf2.h
@@ -48,8 +48,6 @@ struct bcm_sf2_hw_params {
 
 struct bcm_sf2_port_status {
 	unsigned int link;
-
-	struct ethtool_eee eee;
 };
 
 struct bcm_sf2_cfp_priv {
diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
index 788361ad68a0..d8b8074a47b9 100644
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -244,9 +244,6 @@ enum bcm_sf2_reg_offs {
 
 #define CORE_JOIN_ALL_VLAN_EN		0xd140
 
-#define CORE_EEE_EN_CTRL		0x24800
-#define CORE_EEE_LPI_INDICATE		0x24810
-
 #define CORE_CFP_ACC			0x28000
 #define  OP_STR_DONE			(1 << 0)
 #define  OP_SEL_SHIFT			1
-- 
2.9.3

[PATCH net-next v3 09/12] net: dsa: b53: Wire-up EEE

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-09-19 17:47:26

Add support for enabling and disabling EEE, as well as re-negotiating it in
.adjust_link() and in .port_enable().

Reviewed-by: Vivien Didelot <redacted>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 491e4ffa8a0e..4e37ec27e496 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -523,6 +523,10 @@ static int b53_enable_port(struct dsa_switch *ds, int port,
 
 	b53_imp_vlan_setup(ds, cpu_port);
 
+	/* If EEE was enabled, restore it */
+	if (dev->ports[port].eee.eee_enabled)
+		b53_eee_enable_set(ds, port, true);
+
 	return 0;
 }
 
@@ -879,6 +883,7 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
 			    struct phy_device *phydev)
 {
 	struct b53_device *dev = ds->priv;
+	struct ethtool_eee *p = &dev->ports[port].eee;
 	u8 rgmii_ctrl = 0, reg = 0, off;
 
 	if (!phy_is_pseudo_fixed_link(phydev))
@@ -1000,6 +1005,9 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
 			b53_write8(dev, B53_CTRL_PAGE, po_reg, gmii_po);
 		}
 	}
+
+	/* Re-negotiate EEE if it was enabled already */
+	p->eee_enabled = b53_eee_init(ds, port, phydev);
 }
 
 int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
@@ -1605,6 +1613,8 @@ static const struct dsa_switch_ops b53_switch_ops = {
 	.adjust_link		= b53_adjust_link,
 	.port_enable		= b53_enable_port,
 	.port_disable		= b53_disable_port,
+	.get_mac_eee		= b53_get_mac_eee,
+	.set_mac_eee		= b53_set_mac_eee,
 	.port_bridge_join	= b53_br_join,
 	.port_bridge_leave	= b53_br_leave,
 	.port_stp_state_set	= b53_br_set_stp_state,
-- 
2.9.3

[PATCH net-next v3 10/12] net: dsa: b53: Export b53_imp_vlan_setup()

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-09-19 17:47:29

bcm_sf2 and b53 do exactly the same thing, so share that piece.

Reviewed-by: Vivien Didelot <redacted>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c |  3 ++-
 drivers/net/dsa/b53/b53_priv.h   |  1 +
 drivers/net/dsa/bcm_sf2.c        | 23 +----------------------
 3 files changed, 4 insertions(+), 23 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 4e37ec27e496..c3f1cd2c33ea 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -484,7 +484,7 @@ static int b53_fast_age_vlan(struct b53_device *dev, u16 vid)
 	return b53_flush_arl(dev, FAST_AGE_VLAN);
 }
 
-static void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
+void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
 {
 	struct b53_device *dev = ds->priv;
 	unsigned int i;
@@ -500,6 +500,7 @@ static void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
 		b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), pvlan);
 	}
 }
+EXPORT_SYMBOL(b53_imp_vlan_setup);
 
 static int b53_enable_port(struct dsa_switch *ds, int port,
 			   struct phy_device *phy)
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index aabe80eab25d..8f4f83e2e4bd 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -284,6 +284,7 @@ static inline int b53_switch_get_reset_gpio(struct b53_device *dev)
 #endif
 
 /* Exported functions towards other drivers */
+void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port);
 void b53_get_strings(struct dsa_switch *ds, int port, uint8_t *data);
 void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data);
 int b53_get_sset_count(struct dsa_switch *ds);
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 4e8ef4c07eab..08639674947a 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -40,27 +40,6 @@ static enum dsa_tag_protocol bcm_sf2_sw_get_tag_protocol(struct dsa_switch *ds)
 	return DSA_TAG_PROTO_BRCM;
 }
 
-static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
-{
-	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	unsigned int i;
-	u32 reg;
-
-	/* Enable the IMP Port to be in the same VLAN as the other ports
-	 * on a per-port basis such that we only have Port i and IMP in
-	 * the same VLAN.
-	 */
-	for (i = 0; i < priv->hw_params.num_ports; i++) {
-		if (!((1 << i) & ds->enabled_port_mask))
-			continue;
-
-		reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(i));
-		reg |= (1 << cpu_port);
-		core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(i));
-	}
-}
-
-
 static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
@@ -240,7 +219,7 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
 	reg |= priv->dev->ports[port].vlan_ctl_mask;
 	core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(port));
 
-	bcm_sf2_imp_vlan_setup(ds, cpu_port);
+	b53_imp_vlan_setup(ds, cpu_port);
 
 	/* If EEE was enabled, restore it */
 	if (priv->dev->ports[port].eee.eee_enabled)
-- 
2.9.3

[PATCH net-next v3 11/12] net: dsa: bcm_sf2: Use SF2_NUM_EGRESS_QUEUES for CFP

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-09-19 17:47:31

The magic number 8 in 3 locations in bcm_sf2_cfp.c actually designates
the number of switch port egress queues, so use that define instead of
open-coding it.

Reviewed-by: Vivien Didelot <redacted>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/bcm_sf2_cfp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2_cfp.c b/drivers/net/dsa/bcm_sf2_cfp.c
index 8a1da7e67707..94649e1481ec 100644
--- a/drivers/net/dsa/bcm_sf2_cfp.c
+++ b/drivers/net/dsa/bcm_sf2_cfp.c
@@ -144,7 +144,7 @@ static int bcm_sf2_cfp_rule_set(struct dsa_switch *ds, int port,
 	 * destination port is enabled and that we are within the
 	 * number of ports supported by the switch
 	 */
-	port_num = fs->ring_cookie / 8;
+	port_num = fs->ring_cookie / SF2_NUM_EGRESS_QUEUES;
 
 	if (fs->ring_cookie == RX_CLS_FLOW_DISC ||
 	    !(BIT(port_num) & ds->enabled_port_mask) ||
@@ -280,7 +280,7 @@ static int bcm_sf2_cfp_rule_set(struct dsa_switch *ds, int port,
 	 * We have a small oddity where Port 6 just does not have a
 	 * valid bit here (so we subtract by one).
 	 */
-	queue_num = fs->ring_cookie % 8;
+	queue_num = fs->ring_cookie % SF2_NUM_EGRESS_QUEUES;
 	if (port_num >= 7)
 		port_num -= 1;
 
@@ -401,7 +401,7 @@ static int bcm_sf2_cfp_rule_get(struct bcm_sf2_priv *priv, int port,
 	/* There is no Port 6, so we compensate for that here */
 	if (nfc->fs.ring_cookie >= 6)
 		nfc->fs.ring_cookie++;
-	nfc->fs.ring_cookie *= 8;
+	nfc->fs.ring_cookie *= SF2_NUM_EGRESS_QUEUES;
 
 	/* Extract the destination queue */
 	queue_num = (reg >> NEW_TC_SHIFT) & NEW_TC_MASK;
-- 
2.9.3

[PATCH net-next v3 12/12] net: dsa: bcm_sf2: Utilize b53_{enable,disable}_port

From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-09-19 17:47:34

Export b53_{enable,disable}_port and use these two functions in
bcm_sf2_port_setup and bcm_sf2_port_disable. The generic functions
cannot be used without wrapping because we need to manage additional
switch integration details (PHY, Broadcom tag etc.).

Reviewed-by: Vivien Didelot <redacted>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c |  8 ++++----
 drivers/net/dsa/b53/b53_priv.h   |  2 ++
 drivers/net/dsa/bcm_sf2.c        | 26 ++------------------------
 3 files changed, 8 insertions(+), 28 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index c3f1cd2c33ea..a9f2a5b55a5e 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -502,8 +502,7 @@ void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
 }
 EXPORT_SYMBOL(b53_imp_vlan_setup);
 
-static int b53_enable_port(struct dsa_switch *ds, int port,
-			   struct phy_device *phy)
+int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
 {
 	struct b53_device *dev = ds->priv;
 	unsigned int cpu_port = dev->cpu_port;
@@ -530,9 +529,9 @@ static int b53_enable_port(struct dsa_switch *ds, int port,
 
 	return 0;
 }
+EXPORT_SYMBOL(b53_enable_port);
 
-static void b53_disable_port(struct dsa_switch *ds, int port,
-			     struct phy_device *phy)
+void b53_disable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
 {
 	struct b53_device *dev = ds->priv;
 	u8 reg;
@@ -542,6 +541,7 @@ static void b53_disable_port(struct dsa_switch *ds, int port,
 	reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
 }
+EXPORT_SYMBOL(b53_disable_port);
 
 void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
 {
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 8f4f83e2e4bd..603c66d240d8 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -311,6 +311,8 @@ int b53_mirror_add(struct dsa_switch *ds, int port,
 		   struct dsa_mall_mirror_tc_entry *mirror, bool ingress);
 void b53_mirror_del(struct dsa_switch *ds, int port,
 		    struct dsa_mall_mirror_tc_entry *mirror);
+int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy);
+void b53_disable_port(struct dsa_switch *ds, int port, struct phy_device *phy);
 void b53_brcm_hdr_setup(struct dsa_switch *ds, int port);
 void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable);
 int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy);
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 08639674947a..0072a959db5b 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -163,7 +163,6 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
 			      struct phy_device *phy)
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	s8 cpu_port = ds->dst->cpu_dp->index;
 	unsigned int i;
 	u32 reg;
 
@@ -184,9 +183,6 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
 		reg |= i << (PRT_TO_QID_SHIFT * i);
 	core_writel(priv, reg, CORE_PORT_TC2_QOS_MAP_PORT(port));
 
-	/* Clear the Rx and Tx disable bits and set to no spanning tree */
-	core_writel(priv, 0, CORE_G_PCTL_PORT(port));
-
 	/* Re-enable the GPHY and re-apply workarounds */
 	if (priv->int_phy_mask & 1 << port && priv->hw_params.num_gphy == 1) {
 		bcm_sf2_gphy_enable_set(ds, true);
@@ -209,23 +205,7 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
 	if (port == priv->moca_port)
 		bcm_sf2_port_intr_enable(priv, port);
 
-	/* Set this port, and only this one to be in the default VLAN,
-	 * if member of a bridge, restore its membership prior to
-	 * bringing down this port.
-	 */
-	reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(port));
-	reg &= ~PORT_VLAN_CTRL_MASK;
-	reg |= (1 << port);
-	reg |= priv->dev->ports[port].vlan_ctl_mask;
-	core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(port));
-
-	b53_imp_vlan_setup(ds, cpu_port);
-
-	/* If EEE was enabled, restore it */
-	if (priv->dev->ports[port].eee.eee_enabled)
-		b53_eee_enable_set(ds, port, true);
-
-	return 0;
+	return b53_enable_port(ds, port, phy);
 }
 
 static void bcm_sf2_port_disable(struct dsa_switch *ds, int port,
@@ -248,9 +228,7 @@ static void bcm_sf2_port_disable(struct dsa_switch *ds, int port,
 	else
 		off = CORE_G_PCTL_PORT(port);
 
-	reg = core_readl(priv, off);
-	reg |= RX_DIS | TX_DIS;
-	core_writel(priv, reg, off);
+	b53_disable_port(ds, port, phy);
 
 	/* Power down the port memory */
 	reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
-- 
2.9.3

Re: [PATCH net-next v3 00/12] net: dsa: b53/bcm_sf2 cleanups

From: David Miller <davem@davemloft.net>
Date: 2017-09-19 23:09:13

From: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue, 19 Sep 2017 10:46:42 -0700
This patch series is a first pass set of clean-ups to reduce the number of LOCs
between b53 and bcm_sf2 and sharing as many functions as possible.

There is a number of additional cleanups queued up locally that require more
thorough testing.
Series applied, thanks.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help