[PATCH net-next 02/12] net: dsa: b53: Make b53_enable_cpu_port() take a port argument
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-09-18 21:41:42
Subsystem:
broadcom b53/sf2 ethernet switch driver, networking drivers, networking [dsa], the rest · Maintainers:
Florian Fainelli, Jonas Gorski, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds
In preparation for future changes allowing the configuring of multiple CPU ports, make b53_enable_cpu_port() take a port argument. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/net/dsa/b53/b53_common.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 274f3679f33d..d8bc54cfcfbe 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c@@ -538,19 +538,18 @@ static void b53_disable_port(struct dsa_switch *ds, int port, b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg); } -static void b53_enable_cpu_port(struct b53_device *dev) +static void b53_enable_cpu_port(struct b53_device *dev, int port) { - unsigned int cpu_port = dev->cpu_port; u8 port_ctrl; /* BCM5325 CPU port is at 8 */ - if ((is5325(dev) || is5365(dev)) && cpu_port == B53_CPU_PORT_25) - cpu_port = B53_CPU_PORT; + if ((is5325(dev) || is5365(dev)) && port == B53_CPU_PORT_25) + port = B53_CPU_PORT; port_ctrl = PORT_CTRL_RX_BCST_EN | PORT_CTRL_RX_MCST_EN | PORT_CTRL_RX_UCST_EN; - b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(cpu_port), port_ctrl); + b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl); } static void b53_enable_mib(struct b53_device *dev)
@@ -820,7 +819,7 @@ static int b53_setup(struct dsa_switch *ds) if (BIT(port) & ds->enabled_port_mask) b53_enable_port(ds, port, NULL); else if (dsa_is_cpu_port(ds, port)) - b53_enable_cpu_port(dev); + b53_enable_cpu_port(dev, port); else b53_disable_port(ds, port, NULL); }
--
2.9.3