Thread (8 messages) 8 messages, 3 authors, 2017-08-19

[PATCH net v2 2/2] net: ixgbe: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag

flat view
STALE3350d SUPERSEDED

From: Ding Tianhong <hidden>
Date: 2017-08-17 03:25:42
Also in: intel-wired-lan, lkml, sparclinux
Subsystem: intel ethernet drivers, networking drivers, the rest · Maintainers: Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

Revision v2 of 4 in this series.

Revisions (4)
  1. v1 [diff vs current]
  2. v2 current
  3. v3 [diff vs current]
  4. v3 [diff vs current]
The ixgbe driver use the compile check to determine if it can
send TLPs to Root Port with the Relaxed Ordering Attribute set,
this is too inconvenient, now the new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING
has been added to the kernel and we could check the bit4 in the PCIe
Device Control register to determine whether we should use the Relaxed
Ordering Attributes or not, so use this new way in the ixgbe driver.

Signed-off-by: Ding Tianhong <redacted>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c  | 37 ++++++++++++-------------
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 32 +++++++++++----------
 2 files changed, 35 insertions(+), 34 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index 523f9d0..d1571e3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -175,31 +175,30 @@ static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
  **/
 static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
 {
-#ifndef CONFIG_SPARC
-	u32 regval;
-	u32 i;
-#endif
+	u32 regval, i;
 	s32 ret_val;
+	struct ixgbe_adapter *adapter = hw->back;
 
 	ret_val = ixgbe_start_hw_generic(hw);
 
-#ifndef CONFIG_SPARC
-	/* Disable relaxed ordering */
-	for (i = 0; ((i < hw->mac.max_tx_queues) &&
-	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
-		regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
-		regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
-		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
-	}
+	if (!pcie_relaxed_ordering_enabled(adapter->pdev)) {
+		/* Disable relaxed ordering */
+		for (i = 0; ((i < hw->mac.max_tx_queues) &&
+		     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+			regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
+			regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
+			IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
+		}
 
-	for (i = 0; ((i < hw->mac.max_rx_queues) &&
-	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
-		regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
-		regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
-			    IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
-		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+		for (i = 0; ((i < hw->mac.max_rx_queues) &&
+		     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+			regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+			regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+				    IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
+			IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+		}
 	}
-#endif
+
 	if (ret_val)
 		return ret_val;
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index d4933d2..d1052ee 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -342,6 +342,7 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
 s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
 {
 	u32 i;
+	struct ixgbe_adapter *adapter = hw->back;
 
 	/* Clear the rate limiters */
 	for (i = 0; i < hw->mac.max_tx_queues; i++) {
@@ -350,25 +351,26 @@ s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
 	}
 	IXGBE_WRITE_FLUSH(hw);
 
-#ifndef CONFIG_SPARC
-	/* Disable relaxed ordering */
-	for (i = 0; i < hw->mac.max_tx_queues; i++) {
-		u32 regval;
+	if (!pcie_relaxed_ordering_enabled(adapter->pdev)) {
+		/* Disable relaxed ordering */
+		for (i = 0; i < hw->mac.max_tx_queues; i++) {
+			u32 regval;
 
-		regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
-		regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
-		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
-	}
+			regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
+			regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
+			IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
+		}
 
-	for (i = 0; i < hw->mac.max_rx_queues; i++) {
-		u32 regval;
+		for (i = 0; i < hw->mac.max_rx_queues; i++) {
+			u32 regval;
 
-		regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
-		regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
-			    IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
-		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+			regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+			regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+				    IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
+			IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+		}
 	}
-#endif
+
 	return 0;
 }
 
-- 
1.8.3.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help