[PATCH net-next v2 01/13] amd-xgbe: Set the MDIO mode for 10000Base-T configuration
flat view
STALE3345d
From: Tom Lendacky <thomas.lendacky@amd.com>
Date: 2017-08-18 14:02:23
Subsystem:
amd xgbe driver, networking drivers, the rest · Maintainers:
Raju Rangoju, Prashanth Kumar K R, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v2 of 2 in this series.
Revisions (2)
- v1 [diff vs current]
- v2 current
Currently the MDIO mode is set to none for the 10000Base-T, which is incorrect. The MDIO mode should for this configuration should be clause 45. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> --- drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index 04b5c14..81c45fa 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c@@ -2921,7 +2921,7 @@ static int xgbe_phy_init(struct xgbe_prv_data *pdata) phy_data->start_mode = XGBE_MODE_KR; } - phy_data->phydev_mode = XGBE_MDIO_MODE_NONE; + phy_data->phydev_mode = XGBE_MDIO_MODE_CL45; break; /* 10GBase-R support */