Thread (15 messages) 15 messages, 2 authors, 2017-08-18

[PATCH net-next v2 00/13] amd-xgbe: AMD XGBE driver updates 2017-08-17

flat view
STALE3346d

From: Tom Lendacky <thomas.lendacky@amd.com>
Date: 2017-08-18 14:02:15

Revision v2 of 2 in this series.

Revisions (2)
  1. v1 [diff vs current]
  2. v2 current
The following updates are included in this driver update series:

- Set the MDIO mode to clause 45 for the 10GBase-T configuration
- Set the MII control width to 8-bits for speeds less than 1Gbps
- Fix an issue to related to module removal when the devices are up
- Fix ethtool statistics related to packet counting of TSO packets
- Add support for device renaming
- Add additional dynamic debug output for the PCS window calculation
- Optimize reading of DMA channel interrupt enablement register
- Add additional dynamic debug output about the hardware features
- Add per queue Tx and Rx ethtool statistics
- Add a macro to clear ethtool_link_ksettings modes
- Convert the driver to use the ethtool_link_ksettings
- Add support for VXLAN offload capabilities
- Add additional ethtool statistics related to VXLAN

This patch series is based on net-next.

---

Changes since v1:
- Remove added debugfs support for reading SFP eeprom and phydev
  registers


Tom Lendacky (13):
      amd-xgbe: Set the MDIO mode for 10000Base-T configuration
      amd-xgbe: Set the MII control width for the MAC interface
      amd-xgbe: Be sure driver shuts down cleanly on module removal
      amd-xgbe: Update TSO packet statistics accuracy
      amd-xgbe: Add support to handle device renaming
      amd-xgbe: Add additional dynamic debug messages
      amd-xgbe: Optimize DMA channel interrupt enablement
      amd-xgbe: Add hardware features debug output
      amd-xgbe: Add per queue Tx and Rx statistics
      net: ethtool: Add macro to clear a link mode setting
      amd-xgbe: Convert to using the new link mode settings
      amd-xgbe: Add support for VXLAN offload capabilities
      amd-xgbe: Add additional ethtool statistics


 drivers/net/ethernet/amd/xgbe/xgbe-common.h  |   25 +
 drivers/net/ethernet/amd/xgbe/xgbe-debugfs.c |   25 +
 drivers/net/ethernet/amd/xgbe/xgbe-dev.c     |  198 ++++++++---
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c     |  487 ++++++++++++++++++++++++++
 drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c |   86 +++--
 drivers/net/ethernet/amd/xgbe/xgbe-main.c    |   97 +++--
 drivers/net/ethernet/amd/xgbe/xgbe-mdio.c    |   81 +++-
 drivers/net/ethernet/amd/xgbe/xgbe-pci.c     |    4 
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c  |   54 ++-
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c  |  352 ++++++++++---------
 drivers/net/ethernet/amd/xgbe/xgbe.h         |   91 ++++-
 include/linux/ethtool.h                      |   11 +
 12 files changed, 1158 insertions(+), 353 deletions(-)

-- 
Tom Lendacky
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help