[PATCH net-next 2/4] net: dsa: lan9303: Multiply by 4 to get MDIO register
From: Egil Hjelmeland <hidden>
Date: 2017-07-28 15:12:42
Also in:
lkml
Subsystem:
networking drivers, networking [dsa], the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Linus Torvalds
lan9303_mdio_write()/_read() must multiply register number by 4 to get offset. Added some commments to the register definitions. Signed-off-by: Egil Hjelmeland <redacted> --- drivers/net/dsa/lan9303-core.c | 6 ++++++ drivers/net/dsa/lan9303_mdio.c | 2 ++ 2 files changed, 8 insertions(+)
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index 9d0ab77edb4a..96ebeb9bd59a 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c@@ -20,6 +20,9 @@ #include "lan9303.h" +/* 13.2 System Control and Status Registers + * Multiply register number by 4 to get address offset. + */ #define LAN9303_CHIP_REV 0x14 # define LAN9303_CHIP_ID 0x9303 #define LAN9303_IRQ_CFG 0x15
@@ -53,6 +56,9 @@ #define LAN9303_VIRT_PHY_BASE 0x70 #define LAN9303_VIRT_SPECIAL_CTRL 0x77 +/*13.4 Switch Fabric Control and Status Registers + * Accessed indirectly via SWITCH_CSR_CMD, SWITCH_CSR_DATA. + */ #define LAN9303_SW_DEV_ID 0x0000 #define LAN9303_SW_RESET 0x0001 #define LAN9303_SW_RESET_RESET BIT(0)
diff --git a/drivers/net/dsa/lan9303_mdio.c b/drivers/net/dsa/lan9303_mdio.c
index 93c36c0541cf..2db7970fc88c 100644
--- a/drivers/net/dsa/lan9303_mdio.c
+++ b/drivers/net/dsa/lan9303_mdio.c@@ -40,6 +40,7 @@ static int lan9303_mdio_write(void *ctx, uint32_t reg, uint32_t val) { struct lan9303_mdio *sw_dev = (struct lan9303_mdio *)ctx; + reg <<= 2; /* reg num to offset */ mutex_lock(&sw_dev->device->bus->mdio_lock); lan9303_mdio_real_write(sw_dev->device, reg, val & 0xffff); lan9303_mdio_real_write(sw_dev->device, reg + 2, (val >> 16) & 0xffff);
@@ -57,6 +58,7 @@ static int lan9303_mdio_read(void *ctx, uint32_t reg, uint32_t *val) { struct lan9303_mdio *sw_dev = (struct lan9303_mdio *)ctx; + reg <<= 2; /* reg num to offset */ mutex_lock(&sw_dev->device->bus->mdio_lock); *val = lan9303_mdio_real_read(sw_dev->device, reg); *val |= (lan9303_mdio_real_read(sw_dev->device, reg + 2) << 16);
--
2.11.0