On Fri, Jul 28, 2017 at 5:28 PM, Corentin Labbe
[off-list ref] wrote:

Hello

The current way to find if the phy is internal is to compare DT phy-mode
and emac_variant/internal_phy.
But it will negate a possible future SoC where an external PHY use the
same phy mode than the internal one.

This patchs series adds a new way to find if the PHY is internal, via its
compatible.

You've already joined in on the discussion for the patch "net: stmmac:
dwmac-rk: Add internal phy support". It is pretty much the same issue.
Please wait for it to come to a proper conclusion. At least then we can
agree on something so different platforms with the same problem don't
have diverging solutions.

ChenYu

Corentin Labbe (3):
  dt-bindings: net: add compatible for internal sun8i-h3/sun8i-v3s PHYs
  ARM: sunxi: h3/h5: Add sun8i-h3-ephy compatible
  net-next: stmmac: dwmac-sun8i: choose internal PHY via compatible

 Documentation/devicetree/bindings/net/dwmac-sun8i.txt |  4 ++--
 arch/arm/boot/dts/sunxi-h3-h5.dtsi                    |  3 ++-
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c     | 16 ++++++++++------
 3 files changed, 14 insertions(+), 9 deletions(-)

--
2.13.0