[net-next 14/15] ixgbe: add missing configuration for rate select 1
From: Jeff Kirsher <hidden>
Date: 2017-05-31 21:19:55
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Emil Tantilov <redacted> Add RS1 configuration to ixgbe_set_soft_rate_select_speed() Signed-off-by: Emil Tantilov <redacted> Tested-by: Andrew Bowers <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 7af85f505bad..4e35e7017f3d 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c@@ -4278,4 +4278,23 @@ void ixgbe_set_soft_rate_select_speed(struct ixgbe_hw *hw, hw_dbg(hw, "Failed to write Rx Rate Select RS0\n"); return; } + + /* Set RS1 */ + status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB, + IXGBE_I2C_EEPROM_DEV_ADDR2, + &eeprom_data); + if (status) { + hw_dbg(hw, "Failed to read Rx Rate Select RS1\n"); + return; + } + + eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) | rs; + + status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB, + IXGBE_I2C_EEPROM_DEV_ADDR2, + eeprom_data); + if (status) { + hw_dbg(hw, "Failed to write Rx Rate Select RS1\n"); + return; + } }
--
2.12.2