[net-next 13/15] ixgbe: always call setup_mac_link for multispeed fiber
From: Jeff Kirsher <hidden>
Date: 2017-05-31 21:19:55
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Emil Tantilov <redacted> Remove the logic which would previously skip the link configuration in the case where we are already at the requested speed in ixgbe_setup_mac_link_multispeed_fiber(). By exiting early we are skipping the link configuration and as such the driver may not always configure the PHY correctly for SFP+. Signed-off-by: Emil Tantilov <redacted> Tested-by: Andrew Bowers <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 18 ------------------ 1 file changed, 18 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 76ad0e0bd542..7af85f505bad 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c@@ -4121,15 +4121,6 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, speedcnt++; highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL; - /* If we already have link at this speed, just jump out */ - status = hw->mac.ops.check_link(hw, &link_speed, &link_up, - false); - if (status) - return status; - - if (link_speed == IXGBE_LINK_SPEED_10GB_FULL && link_up) - goto out; - /* Set the module link speed */ switch (hw->phy.media_type) { case ixgbe_media_type_fiber:
@@ -4181,15 +4172,6 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN) highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL; - /* If we already have link at this speed, just jump out */ - status = hw->mac.ops.check_link(hw, &link_speed, &link_up, - false); - if (status) - return status; - - if (link_speed == IXGBE_LINK_SPEED_1GB_FULL && link_up) - goto out; - /* Set the module link speed */ switch (hw->phy.media_type) { case ixgbe_media_type_fiber:
--
2.12.2