Thread (21 messages) 21 messages, 6 authors, 2017-03-28
STALE3376d

[PATCH 4/7] ath9k: Add support for reading the MAC address with nvmem

From: Alban <albeu@free.fr>
Date: 2017-03-13 21:07:09
Also in: linux-wireless, lkml
Subsystem: atheros ath generic utilities, qualcomm atheros ath9k wireless driver, the rest · Maintainers: Jeff Johnson, Toke Høiland-Jørgensen, Linus Torvalds

On embedded platforms the MAC address is often stored in flash,
use nvmem to read it if the platform data or DT didn't specify one.

Signed-off-by: Alban <albeu@free.fr>
---
 drivers/net/wireless/ath/ath9k/init.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 054f254..36b51a5 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -594,6 +594,35 @@ static int ath9k_of_init(struct ath_softc *sc)
 	return 0;
 }
 
+static int ath9k_get_nvmem_address(struct ath_softc *sc)
+{
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+	struct nvmem_cell *cell;
+	size_t cell_size;
+	int err = 0;
+	void *mac;
+
+	cell = nvmem_cell_get(sc->dev, "address");
+	if (IS_ERR(cell))
+		return PTR_ERR(cell);
+
+	mac = nvmem_cell_read(cell, &cell_size);
+	nvmem_cell_put(cell);
+
+	if (IS_ERR(mac))
+		return PTR_ERR(mac);
+
+	if (cell_size == 6) {
+		ether_addr_copy(common->macaddr, mac);
+	} else {
+		dev_err(sc->dev, "nvmem 'address' cell has invalid size\n");
+		err = -EINVAL;
+	}
+
+	kfree(mac);
+	return err;
+}
+
 static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
 			    const struct ath_bus_ops *bus_ops)
 {
@@ -656,6 +685,10 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
 	if (ret)
 		return ret;
 
+	/* If no MAC address has been set yet try to use nvmem */
+	if (!is_valid_ether_addr(common->macaddr))
+		ath9k_get_nvmem_address(sc);
+
 	/* If the EEPROM hasn't been retrieved via firmware request
 	 * use the nvmem API insted.
 	 */
-- 
2.7.4
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help