[PATCH net 4/7] bnx2x: fix detection of VLAN filtering feature for VF
From: Michal Schmidt <hidden>
Date: 2017-03-03 16:08:43
Subsystem:
broadcom bnx2x 10 gigabit ethernet driver, networking drivers, the rest · Maintainers:
Sudarsana Kalluru, Manish Chopra, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
VFs are currently missing the VLAN filtering feature, because we were checking the PF's acquire response before actually performing the acquire. Fix it by setting the feature flag later when we have the PF response. Signed-off-by: Michal Schmidt <redacted> --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index d57290b9ea..ac76fc251d 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c@@ -13292,17 +13292,15 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev, dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA; - /* VF with OLD Hypervisor or old PF do not support filtering */ if (IS_PF(bp)) { if (chip_is_e1x) bp->accept_any_vlan = true; else dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER; -#ifdef CONFIG_BNX2X_SRIOV - } else if (bp->acquire_resp.pfdev_info.pf_cap & PFVF_CAP_VLAN_FILTER) { - dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER; -#endif } + /* For VF we'll know whether to enable VLAN filtering after + * getting a response to CHANNEL_TLV_ACQUIRE from PF. + */ dev->features |= dev->hw_features | NETIF_F_HW_VLAN_CTAG_RX; dev->features |= NETIF_F_HIGHDMA;
@@ -14009,6 +14007,14 @@ static int bnx2x_init_one(struct pci_dev *pdev, rc = bnx2x_vfpf_acquire(bp, tx_count, rx_count); if (rc) goto init_one_freemem; + +#ifdef CONFIG_BNX2X_SRIOV + /* VF with OLD Hypervisor or old PF do not support filtering */ + if (bp->acquire_resp.pfdev_info.pf_cap & PFVF_CAP_VLAN_FILTER) { + dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER; + dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; + } +#endif } /* Enable SRIOV if capability found in configuration space */
--
2.9.3