Re: Initializing MAC address at run-time

On Wed, Jan 18, 2017 at 03:03:57PM +0100, Mason wrote:

Hello,

When my system boots up, eth0 is given a seemingly random MAC address.

[    0.950734] nb8800 26000.ethernet eth0: MAC address ba:de:d6:38:b8:38
[    0.957334] nb8800 26000.ethernet eth0: MAC address 6e:f1:48:de:d6:c4


The DT node for eth0 is:

	eth0: ethernet@26000 {
		compatible = "sigma,smp8734-ethernet";
		reg = <0x26000 0x800>;
		interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&clkgen SYS_CLK>;
	};

Documentation/devicetree/bindings/net/ethernet.txt mentions
- local-mac-address: array of 6 bytes, specifies the MAC address that was
  assigned to the network device;

And indeed, if I define this property, eth0 ends up with the MAC address
I specify in the device tree. But of course, I don't want all my boards
to share the same MAC address. Every interface has a unique MAC address.

In fact, the boot loader (not Uboot, a custom non-DT boot loader) stores
the MAC address somewhere in MMIO space, in some weird custom format.

So, at init, I can find the MAC address, and dynamically insert the
"local-mac-address" property in the eth0 node.

To me it sounds very convoluted to do this from the kernel, to pass
information back to itself. I don't think this is the best way to handle
this.

Is there another (better) way to do this?

I'll post my code below, for illustration purpose.

Mark suggested this can be done from user-space, but I can't do that,
because I'm using an NFS rootfs, so I need the network before I even
have a user-space. And the DHCP server is configured to serve different
root filesystems, based on the MAC address.

That's not quite what I said. I asked whether your information was
coming from userspace or from a kernel driver.

My suggestion was that this should be done in the probe path somehow,
by describing the relationship between the ethernet controller and the
device containing the MAC information.

e.g. on the ethernet device, have a phandle (and perhaps some other
args) describinng the device containing the MAC, and how to extract it.

That way, in the ethernet probe path we can go and look up the MAC
address from the provider of that information.

I need to do something similar with the NAND partitions. The boot loader
stores the partition offsets somewhere, and I need to pass this info
to the NAND framework, so I assumed that inserting the corresponding
properties at run-time was the correct way to do it.

I would say similar could happen here.

Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html