Re: [PATCH] MIPS: NI 169445 board support

On Tue, Dec 20, 2016 at 05:34:34PM +0100, Ralf Baechle wrote:

On Fri, Dec 02, 2016 at 09:42:09AM -0600, Nathan Sullivan wrote:

quoted

Date:   Fri, 2 Dec 2016 09:42:09 -0600
From: Nathan Sullivan <redacted>
To: ralf@linux-mips.org, mark.rutland@arm.com, robh+dt@kernel.org
CC: linux-mips@linux-mips.org, devicetree@vger.kernel.org,
 linux-kernel@vger.kernel.org, Nathan Sullivan [off-list ref]
Subject: [PATCH] MIPS: NI 169445 board support
Content-Type: text/plain

Support the National Instruments 169445 board.

Nathan,

I assume you're going to repost the changes Rob asked for in
https://patchwork.linux-mips.org/patch/14641/#26924 and resubmit?

Thanks,

  Ralf

Hmm, I found the issue with the generic MIPS config and dwc_eth_qos.  The NIC
driver attempts to cache align a descriptor ring using the ___cacheline_aligned
attribute on the descriptor struct, in combination with a "skip" feature in
hardware.  However, the skip feature only has a three bit field, and the generic
MIPS config selects MIPS_L1_CACHE_SHIFT_7.  So, the line size is 128, and with a
64-bit bus, that means the NIC descriptor skip field would need to be set to
14 to align the 16-byte descriptors...

I guess it makes sense for a generic MIPS kernel to align everything for 128 byte
cache lines, and for me to fix the dwc_eth_qos driver to handle cases where the
line size is too big for the hardware skip feature, right?

Thanks,

   Nathan