[PATCH net-next v3 0/3] net: stmmac: add Allwinner H616 EMAC1 support

The H616 secondary EMAC supports RMII at 10/100 Mbps and uses a separate
system-control clock register at offset 0x34. Add its binding and a
sun8i stmmac variant using that register. A distinct compatible without
an older fallback prevents the driver from using EMAC0's clock register.

EMAC1 connects internally to the co-packaged AC200 or AC300 EPHY and has
no external PHY pins. Leave PHY initialization to the PHY driver instead
of using the H3 internal-PHY controls. The RMII-only variant does not
expose the RGMII clock-delay properties.

First move the MAC software reset from probe to the DMA reset callback,
after PHY initialization. This lets the MAC and its MDIO bus remain
registered when the PHY driver or one of its suppliers is not ready yet.
Keep the separate H3 MDIO-mux reset sequence unchanged.

The AC200/AC300 EPHY driver and package bindings are already in
net-next. This series separates the H616 EMAC1 MAC driver and binding
support from the earlier combined series. PWM, MFD and device-tree
enablement are being handled separately.

Signed-off-by: James Hilliard <redacted>
---
Changes in v3:
- Add a prerequisite fix moving the MAC software reset to the DMA reset
  callback, after PHY initialization, so delayed module loading and
  deferred PHY probes do not tear down the MAC and its MDIO bus.
- Preserve the H3 MDIO-mux reset and propagate hardware-reset failures
  through the normal stmmac hardware-setup error path.
- Add Alastair D'Silva to Cc and rebase onto current net-next.
- Link to v2: https://patch.msgid.link/20260915-submit-h616-emac1-v1-v2-0-322b32e40eb9@gmail.com

Changes in v2:
- Drop EMAC1 TX/RX clock-delay property support and keep the existing
  RGMII-only delay descriptions unchanged, as requested by Maxime Ripard.
- Clarify that EMAC1 connects internally to a co-packaged PHY, not an
  external PHY or the H3-style internal-PHY controls.
- Rebase onto current net-next.
- Link to v1: https://patch.msgid.link/20260915-submit-h616-emac1-v1-v1-0-195de0bb1f8a@gmail.com

---
James Hilliard (3):
      net: stmmac: sun8i: reset the MAC after PHY initialization
      dt-bindings: net: allwinner: add H616 EMAC1
      net: stmmac: sun8i: add support for Allwinner H616 EMAC1

 .../bindings/net/allwinner,sun8i-a83t-emac.yaml    | 13 +++++
 .../devicetree/bindings/net/snps,dwmac.yaml        |  2 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c  | 66 +++++++++++++---------
 3 files changed, 55 insertions(+), 26 deletions(-)
---
base-commit: 26ee8cd69d46a14b37ba5e512084fe80d730127a
change-id: 20260914-submit-h616-emac1-v1-143703842abb

Best regards,
--  
James Hilliard [off-list ref]