Re: [PATCH v4] Net Driver: Add Cypress GX3 VID=04b4 PID=3610.

From: Allan Chou <redacted>

Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet
Bridge Controller (Vendor=04b4 ProdID=3610).

Patch verified on x64 linux kernel 4.7.4, 4.8.6, 4.9-rc4 systems
with the Kensington SD4600P USB-C Universal Dock with Power,
which uses the Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge
Controller.

A similar patch was signed-off and tested-by Allan Chou
[off-list ref] on 2015-12-01.

Allan verified his similar patch on x86 Linux kernel 4.1.6 system
with Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.

Tested-by: Allan Chou <redacted>
Tested-by: Chris Roth <redacted>
Tested-by: Artjom Simon <redacted>

Signed-off-by: Allan Chou <redacted>
Signed-off-by: Chris Roth <redacted>
---
 drivers/net/usb/ax88179_178a.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index e6338c1..8a6675d 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c

@@ -1656,6 +1656,19 @@ static const struct driver_info ax88178a_info = {
     .tx_fixup = ax88179_tx_fixup,
 };

+static const struct driver_info cypress_GX3_info = {
+    .description = "Cypress GX3 SuperSpeed to Gigabit Ethernet Controller",
+    .bind = ax88179_bind,
+    .unbind = ax88179_unbind,
+    .status = ax88179_status,
+    .link_reset = ax88179_link_reset,
+    .reset = ax88179_reset,
+    .stop = ax88179_stop,
+    .flags = FLAG_ETHER | FLAG_FRAMING_AX,
+    .rx_fixup = ax88179_rx_fixup,
+    .tx_fixup = ax88179_tx_fixup,
+};