[PATCH net v2 3/4] net: ethernet: ti: davinci_emac: fix device reference leak
From: Johan Hovold <johan@kernel.org>
Date: 2016-11-03 17:41:13
Also in:
linux-omap, lkml
Subsystem:
networking drivers, the rest, ti ethernet switch driver (cpsw) · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Make sure to drop the references taken by bus_find_device() before
returning from emac_dev_open().
Note that phy_connect still takes a reference to the phy device.
Fixes: 5d69e0076a72 ("net: davinci_emac: switch to new mdio")
Cc: Mugunthan V N <redacted>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/net/ethernet/ti/davinci_emac.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index 2fd94a5bc1f3..84fbe5714f8b 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c@@ -1410,6 +1410,7 @@ static int emac_dev_open(struct net_device *ndev) int i = 0; struct emac_priv *priv = netdev_priv(ndev); struct phy_device *phydev = NULL; + struct device *phy = NULL; ret = pm_runtime_get_sync(&priv->pdev->dev); if (ret < 0) {
@@ -1488,19 +1489,20 @@ static int emac_dev_open(struct net_device *ndev) /* use the first phy on the bus if pdata did not give us a phy id */ if (!phydev && !priv->phy_id) { - struct device *phy; - phy = bus_find_device(&mdio_bus_type, NULL, NULL, match_first_device); - if (phy) + if (phy) { priv->phy_id = dev_name(phy); + if (!priv->phy_id || !*priv->phy_id) + put_device(phy); + } } if (!phydev && priv->phy_id && *priv->phy_id) { phydev = phy_connect(ndev, priv->phy_id, &emac_adjust_link, PHY_INTERFACE_MODE_MII); - + put_device(phy); /* reference taken by bus_find_device */ if (IS_ERR(phydev)) { dev_err(emac_dev, "could not connect to phy %s\n", priv->phy_id);
--
2.7.3