[PATCH net-next v6 03/10] dpaa_eth: add option to use one buffer pool set

@@ -18,4 +18,10 @@ config FSL_DPAA_ETH_FRIENDLY_IF_NAME
 	  The DPAA Ethernet netdevices are created for each FMan port available
 	  on a certain board. Enable this to get interface names derived from
 	  the underlying FMan hardware for a simple identification.
+config FSL_DPAA_ETH_COMMON_BPOOL
+	bool "Use a common buffer pool set for all the interfaces"
+	---help---
+	  The DPAA Ethernet netdevices require buffer pools for storing the buffers
+	  used by the FMan hardware for reception. One can use a single buffer pool
+	  set for all interfaces or a dedicated buffer pool set for each interface.
 endif # FSL_DPAA_ETH

@@ -158,6 +158,11 @@ struct fm_port_fqs {
 	struct dpaa_fq *rx_errq;
 };
 
+#ifdef CONFIG_FSL_DPAA_ETH_COMMON_BPOOL
+/* These bpools are shared by all the dpaa interfaces */
+static u8 dpaa_common_bpids[DPAA_BPS_NUM];
+#endif
+
 /* All the dpa bps in use at any moment */
 static struct dpaa_bp *dpaa_bp_array[BM_MAX_NUM_OF_POOLS];
 

@@ -2527,6 +2532,12 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 	for (i = 0; i < DPAA_BPS_NUM; i++) {
 		int err;
 
+#ifdef CONFIG_FSL_DPAA_ETH_COMMON_BPOOL
+		/* if another interface probed the bps reuse those */
+		dpaa_bps[i] = (dpaa_common_bpids[i] != FSL_DPAA_BPID_INV) ?
+				dpaa_bpid2pool(dpaa_common_bpids[i]) : NULL;
+		if (!dpaa_bps[i]) {
+#endif
 		dpaa_bps[i] = dpaa_bp_alloc(dev);
 		if (IS_ERR(dpaa_bps[i]))
 			return PTR_ERR(dpaa_bps[i]);

@@ -2542,6 +2553,11 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 			priv->dpaa_bps[i] = NULL;
 			goto bp_create_failed;
 		}
+#ifdef CONFIG_FSL_DPAA_ETH_COMMON_BPOOL
+		}
+		dpaa_common_bpids[i] = dpaa_bps[i]->bpid;
+		dpaa_bps[i] = (dpaa_bpid2pool(dpaa_common_bpids[i]));
+#endif
 		priv->dpaa_bps[i] = dpaa_bps[i];
 	}
 

@@ -2716,6 +2732,13 @@ static int __init dpaa_load(void)
 	dpaa_rx_extra_headroom = fman_get_rx_extra_headroom();
 	dpaa_max_frm = fman_get_max_frm();
 
+#ifdef CONFIG_FSL_DPAA_ETH_COMMON_BPOOL
+	/* set initial invalid values, first interface probe will set correct
+	 * values that will be shared by the other interfaces
+	 */
+	memset(dpaa_common_bpids, FSL_DPAA_BPID_INV, sizeof(dpaa_common_bpids));
+#endif
+
 	err = platform_driver_register(&dpaa_driver);
 	if (err < 0)
 		pr_err("Error, platform_driver_register() = %d\n", err);