[PATCH net] bnxt: do not busy-poll when link is down
From: Andy Gospodarek <hidden>
Date: 2016-11-22 18:20:35
Subsystem:
broadcom bnxt_en 50 gigabit ethernet driver, networking drivers, the rest · Maintainers:
Michael Chan, Pavan Chebbi, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
When busy polling while a link is down (during a link-flap test), TX timeouts were observed as well as the following messages in the ring buffer: bnxt_en 0008:01:00.2 enP8p1s0f2d2: Resp cmpl intr err msg: 0x51 bnxt_en 0008:01:00.2 enP8p1s0f2d2: hwrm_ring_free tx failed. rc:-1 bnxt_en 0008:01:00.2 enP8p1s0f2d2: Resp cmpl intr err msg: 0x51 bnxt_en 0008:01:00.2 enP8p1s0f2d2: hwrm_ring_free rx failed. rc:-1 These were resolved by checking for link status and returning if link was not up. Signed-off-by: Andy Gospodarek <redacted> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Tested-by: Rob Miller <redacted> --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index e18635b..013e373 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c@@ -1811,6 +1811,9 @@ static int bnxt_busy_poll(struct napi_struct *napi) if (atomic_read(&bp->intr_sem) != 0) return LL_FLUSH_FAILED; + if (!bp->link_info.link_up) + return LL_FLUSH_FAILED; + if (!bnxt_lock_poll(bnapi)) return LL_FLUSH_BUSY;
--
2.1.0