[PATCH net-next 3/3] net: ethernet: mediatek: add the dts property to set if TRGMII supported on GMAC0
flat view
STALE3675d
SUPERSEDED
From: <sean.wang@mediatek.com>
Date: 2016-09-20 07:59:37
Also in:
linux-mediatek
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v1 of 2 in this series.
Revisions (2)
- v1 current
- v2 [diff vs current]
From: Sean Wang <sean.wang@mediatek.com> Add the dts property for the capability if TRGMII supported on GAMC0 Signed-off-by: Sean Wang <sean.wang@mediatek.com> --- Documentation/devicetree/bindings/net/mediatek-net.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
index 6103e55..32f79d8 100644
--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-net.txt@@ -31,7 +31,10 @@ Optional properties: Required properties: - compatible: Should be "mediatek,eth-mac" - reg: The number of the MAC -- phy-handle: see ethernet.txt file in the same directory. +- phy-handle: see ethernet.txt file in the same directory and + the additional phy-mode "tgrmii" is provided in order to connect + with the internal switch MT7530 which is only applicable when reg + is equal to 0. Example:
--
1.9.1