[PATCH net-next v2 3/3] net: ethernet: mediatek: add the dts property to set if the HW supports LRO
flat view
STALE3687d
From: Nelson Chang <hidden>
Date: 2016-09-14 05:59:24
Also in:
linux-mediatek
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v2 of 3 in this series.
Revisions (3)
- v1 [diff vs current]
- v2 current
- v2
Add the dts property for the capability if the hardware supports LRO. Signed-off-by: Nelson Chang <redacted> --- Documentation/devicetree/bindings/net/mediatek-net.txt | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
index 32eaaca..ea09a7f 100644
--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-net.txt@@ -20,6 +20,7 @@ Required properties: - mediatek,ethsys: phandle to the syscon node that handles the port setup - mediatek,pctl: phandle to the syscon node that handles the ports slew rate and driver current +- mediatek,hwlro: the capability if the hardware supports LRO functions Optional properties: - interrupt-parent: Should be the phandle for the interrupt controller
@@ -51,6 +52,7 @@ eth: ethernet@1b100000 { reset-names = "eth"; mediatek,ethsys = <ðsys>; mediatek,pctl = <&syscfg_pctl_a>; + mediatek,hwlro; #address-cells = <1>; #size-cells = <0>;
--
1.9.1