[PATCH net-next 3/3] net: ethernet: mediatek: add dts configuration to enable HW LRO
flat view
STALE3693d
SUPERSEDED
From: Nelson Chang <hidden>
Date: 2016-09-13 13:54:38
Also in:
linux-mediatek
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v1 of 3 in this series.
Revisions (3)
- v1 current
- v2 [diff vs current]
- v3 [diff vs current]
Add the configuration of HW LRO in the binding document. Signed-off-by: Nelson Chang <redacted> --- Documentation/devicetree/bindings/net/mediatek-net.txt | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
index 32eaaca..f43c0d1 100644
--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-net.txt@@ -20,6 +20,7 @@ Required properties: - mediatek,ethsys: phandle to the syscon node that handles the port setup - mediatek,pctl: phandle to the syscon node that handles the ports slew rate and driver current +- mediatek,hwlro: set to enable HW LRO functions of PDMA rx rings Optional properties: - interrupt-parent: Should be the phandle for the interrupt controller
@@ -51,6 +52,7 @@ eth: ethernet@1b100000 { reset-names = "eth"; mediatek,ethsys = <ðsys>; mediatek,pctl = <&syscfg_pctl_a>; + mediatek,hwlro; #address-cells = <1>; #size-cells = <0>;
--
1.9.1